cross-posted from laser cutting community !lasercutting@lemm.ee : https://lemm.ee/post/896795
This was my first real dive into Arduino and multiple button mapping. It took a significant amount of trouble shooting and learning the software to get things to map to the computer action.
Gif of the action https://imgur.com/a/XI9KTeH
Prototype 1:Started this project before I had a laser cutter and had tried to just drill through acrylic. It didn't work well, but it held my buttons during testing
Prototype 2 Still no laser cutter but I cut out using plywood worked much better for manually cutting out the holes
Prototype 3 Much better
13 Comments
MrBakedBeansOnToast@lemmy.world · 3 pts · 3y
Okay I would definitely enjoy that! You could add another button for the beacon though.
MapleEngineer@lemmy.ca · 3 pts · 3y
Sexy. Nice project.
Did you look for a company online that would do the laser cutting for you. I had a couple bookmarked at one point. I'll look around and see if I can find them.
Hypnotized@lemm.ee · 2 pts · 3y
I ended up going down a rabbit hole which ultimately led me to K40 laser cutters, which I ended up buying and starting a whole new hobby!
MapleEngineer@lemmy.ca · 2 pts · 3y
Oh, cool. How do you like it? What did you pay if you don't mind me asking? I've been considering getting a small laser cutter myself.
Hypnotized@lemm.ee · 2 pts · 3y
I love it!
I did a write up on the original purchase and unboxing here !lasercutting@lemm.ee
Initial price was $365, I have added mods and upgrades over the years.
MapleEngineer@lemmy.ca · 2 pts · 3y
I read that post when you first posted it. Thanks for the reminder. What can you cut with it? Have you explored the limits of what it can do?
Hypnotized@lemm.ee · 2 pts · 3y
I stick to mainly 3mm Baltic Birch plywood and acrylic for cutting. I have done up to 6mm. There are lots of things it can cut/etch you just have to be careful understanding what should/should not be cut. For example, vinyl can be cut but should not because it releases caustic gases that damage the machine and your lungs.
For engraving there really isn't a thickness limit, more just what fits inside the machine. I have engraved hardwoods, plywood,cork,slate, painted tiles,
As a CO2 laser it cannot cut metal. It can cut clear acrylic and etch glass.
MapleEngineer@lemmy.ca · 2 pts · 3y
Cool.
I would want to cut 6mm Baltic plywood. The wall behind my desk is made up of Ikea MOPPE drawers of various types.
I would very much like to take that down and build a full wall of MOPPE like drawers of various sizes and depths. I considered having the cutting done by Virtucom in Ottawa but never got around to it. I also considered doing it on my table saw but that's a lot of dusty work.
Have you ever tried cutting a PCB? I use red coated PCBs and would love to be able to cut them with a laser cutter. I'm not thinking the copper but the board itself.
Hypnotized@lemm.ee · 2 pts · 3y
I think it would probably be worth looking into an 80w-100w lasers with larger cutting beds for you. There is a huge community around the Chinese Red/black style laser cutters that are a steps above the k40 but still significantly cheaper than other commercial/consumer models.
That will likely be what I upgrade to next.
I have not tried cutting pcbs with a laser cutter but I am sure someone has so the results are out there somewhere.