Anyone around who has experience with magnet valves? I got one here (in a coffee machine) that buzzes loudly when active, is that a sign it's going to bite the dust soon? Any suggestions for fixes, like repeated descaling, or simply giving it a good whack? Or save myself the hassle and just get a replacement part?
/cc @coffee
4 Comments
froh42@lemmy.world · 9 pts · 2y
The espresso machine I bought off ebay for spare parts (to repair mine) had a buzzing magnet valve. (And the valve did not close)
It turned out the shower sieve was broken and on every cup the machine flushed coffee into the three way valve.
I used coffee machine degreaser and did a lot of backflushing with a "blind sieve" in the portafilter. With the degreaser buzzing slowly got better until it finally stopped and the valve closed correctly again. I never opened or changed the valve.
It was just dirty.
I'm using the machine I bought for spare parts for half a year now (and of course I replaced the shower sieve, which was about 7 euro or so)
(Oh and the machine is a Rancilio Silvia, my old one is 16y old and the spare parts one around 4y or so)
Soggybongo@lemmy.world · 4 pts · 2y
Yeah most likely build up of coffee oil and a few thorough backflushes with espresso cleaner usually quiets the rattle
avidamoeba@lemmy.ca · 3 pts · 2y
I know some folks open them, clean them and change o-rings, etc. If it's not hugely expensive, I'd personally replace it when it goes. I don't know if buzzing is a sign of death but the ones in the espresso machines I've handled did not emit audible noise other than the loud clicking when they switch.
admin@lemmy.tellyou.social · 1 pts · 2y
This is probably not useful but with my machine I just use it (relativly noisy) until it stops working..