https://www.thingiverse.com/thing:6075723 https://youtu.be/KmCcjxr04Fs
My arm was getting tired, so I decided to over-engineer my coffee grinder. It already runs on a standard screwdriver bit hex, so I was actually pretty surprised that nobody else beat me to it.
8 Comments
Z_Karma@lemmy.world · 3 pts · 3y
I've been tempted to do the same thing for years with my Hario Skerton and a Makita 12v driver drill. It's 400ish cranks every morning. I would imagine a finer grind with an espresso bean would take you much longer. As it is, the morning grind is part of my routine and a much as automating the process, having my drill shared between the garage and the kitchen would introduce it's own issues.
Nicadimos@lemmy.fmhy.ml · 2 pts · 3y
I've found that espresso grinding on my 1Zpresso J-Max is way faster than anything on my Hario. Takes roughly 30sec for a 20g dose in the max and I remember the Hario taking as long as a kettle for an aeropress.
Checkplus@lemmy.world · 1 pts · 3y
It's not too bad, I stick with darker roasts and with the smaller dose it's usually under a minute to grind. I'm in a studio, so my drill is actually more accessable now, if a bit harder to hold.
Smotazor@lemmy.ml · 1 pts · 3y
Could you please tell me what the cup you collect the grounds into is called?
Checkplus@lemmy.world · 1 pts · 3y
Dosing Cup: https://a.co/d/8G2iOGB
p1mrx@lemmy.world · 1 pts · 3y
I recently made this grey bracket to fit the front profile of a DCD708:
My rough idea is to add a pair of "tusks" that fit into the 1Zpresso JX to hold the torque.
Checkplus@lemmy.world · 1 pts · 3y
Yeah, that would solve the biggest problem, which is how annoying it is to hold when you try to use just the drill and grinder.