I just built cheapino 3x5_3 split and of course need to get miryoku on it - there's a qmk branch here https://github.com/tompi/qmk_firmware/tree/cheapino but could not find the board over at miryoku.
It also has a special encoder, wondering how one could use it in the most meaningful way with miryoku....
Could someone describe the steps or create a miryoku config?
19 Comments
Tompi@discuss.tchncs.de · 3 pts · 3y
Hey, if you start with the «tompi» keymap, it should be pretty close to miryoku.
hansamann@lemmy.world · 3 pts · 3y
Yes this will be the step 1 - right now I am not able to flash the default, that's most likely because I am completely new to qmk... Will put extra time in soon.
minutnudler@feddit.dk · 3 pts · 3y
I'm using miryoku on my kyria, but because I wanted to customize encoders and other things I just made the layout like miryoku my self (in a qmk config), and added the tweaks I wanted. I remember looking at the miryoku repo and not seeing a way to compile the firmware from there and also customize it easily.
manna_harbour@lemmy.world · 2 pts · 3y
cheapino is using the
split_3x5_3layout that Miryoku QMK already supports, but cheapino doesn't have community layout support enabled, so it won't be used. If /u/Tompi@discuss.tchncs.de fixes that you'll be able to build by merging branches and building forcheepino. You can merge the cheepino branch automatically at build time by usingtompi/qmk_firmware/cheapinowith the Miryoku QMK build workflow branches option.hansamann@lemmy.world · 2 pts · 3y
@tompi@Tompi@discuss.tchncs.de any chance community layout support can be enabled?
Tompi@discuss.tchncs.de · 4 pts · 3y
Hey, sure. I added it now.
Ill try merging miryoku and building tomorrow.
manna_harbour@lemmy.world · 3 pts · 3y
Great!
Here's a sample workflow build run: https://github.com/manna-harbour/miryoku_qmk/actions/runs/5650295293.
hansamann@lemmy.world · 3 pts · 3y
I also ran a workflow (https://github.com/hansamann/miryoku_qmk/actions/runs/5660097404) now and did set the ColemakDHK specifically but it still does not quite give me the desired outcome.
is the left side, which is not really colemak mod dhk... am I doing things dramatically wrong? or is something wrong with my build @Tompi@discuss.tchncs.de - I can hardly imagine, what could it be? also I think the default qmk built worked from a main colemak layout perspective, so the keymap was correkt with the default...
Tompi@discuss.tchncs.de · 2 pts · 3y
Not sure what went wrong, but did you try the same uf2 file i did? Seems like official miryoku to me…
hansamann@lemmy.world · 2 pts · 3y
Yeah the same and default alphas means Colemak Mod dh normally - I assume it's my fault and the key mapper... Checking in a few hours and will report.
hansamann@lemmy.world · 3 pts · 3y
let me confirm it was an issue with karabiner-elements... I totally forget, thx for the great comments @Tompi@discuss.tchncs.de and @manna_harbour@lemmy.world I now just realize that the Miryoku Colemak DHK is also not the default, but I'll just swithc that back to default and it will most likely work!
thx all!
manna_harbour@lemmy.world · 2 pts · 3y
That looks like you have Colemak set on the host.
hansamann@lemmy.world · 2 pts · 3y
Omg I am using a keyboard mapper on my Mac, so far keyboards connected were not mapped again... Will check.
Tompi@discuss.tchncs.de · 2 pts · 3y
Just thought of one thing. Are you sure your network cable is not crossed? Could you test another just to be sure
hansamann@lemmy.world · 2 pts · 3y
Also excellent idea - will test Ina few hours. Although I think manna's comment will be the reason - using a key mapper on mac which turns my us international into Colemak Mod dh. Somehow my other keyboards are not affected, but it's my first qmk build... Maybe I need to exclude it specifically...
Tompi@discuss.tchncs.de · 3 pts · 3y
That is awesome! Can confirm that putting rp2040-zero in dfu mode and just copying the uf2 file from your workflow flashes miryoku in the cheapino.
hansamann@lemmy.world · 2 pts · 3y
I can confirm the uf2 flashing works - but with the uf2 flashed it seems to be using a weird keymap... top row starts with q - w - t - ; z for me... I am confused.. the thumb keys seem to work as expected .will try a workflow build with my settings.
hansamann@lemmy.world · 2 pts · 3y
oh wow, you guys are so amazint. trying this out in a second