Help me find a charging brick

Hey lemmy people,

I recently got a s24+ and I'm looking for a 45w charger brick to get the full speed. Seems like that not every brick charges the phone at 45w. So can I you help me? Thanks!

Ps: I don't want the official Samsung one :))

10 points · 14 comments · view on lemmy.world

14 Comments

nudnyekscentryk@szmer.info · 6 pts · 1y (1 reply)

Check out Baseus GaN chargers

ByteMe@lemmy.world · 2 pts · 1y

I will, thanks!

Fake4000@lemmy.world · 6 pts · 1y (1 reply)
ByteMe@lemmy.world · 3 pts · 1y

Thank you! I'll consider it

limerod@reddthat.com · 3 pts · 1y

You need a charger that supports PD and PPS charging at 45w or higher. Check if the charger supports that spec and you should be fine.

ladfrombrad@lemdro.id · 3 pts · 1y (1 reply)

I've always gone with Anker chargers and cables and they've always seen me right.

Saying that thou and even thou my current phone comes with a 90w charger in the box, I simply use my 20w Anker charger since fast charging isn't exactly good for the health of your battery and if I can, I leave it on a trickle charge at home.

ByteMe@lemmy.world · 1 pts · 1y

Well, 45w is not that much but, 8 can also disable fast charging from settings

Boomkop3@reddthat.com · 3 pts · 1y (1 reply)

hoco is a good brand, they have 45w chargers

ByteMe@lemmy.world · 3 pts · 1y

I'll take a look, thanks

BearOfaTime@lemm.ee · 3 pts · 1y (1 reply)

Samsung, right? If my memory is right, they conform to the Quick Charge standard? So you'll want a charger that supports QC at 45w.

Though it seems most chargers support both QC and Power Delivery these days.

It then comes down to the voltage/current pairs a charger will support (but I think this only applies in QC, not PD?)

Uggh, yea, this is why finding the right charger is such a challenge! Too damn much stuff to remember!

ByteMe@lemmy.world · 2 pts · 1y

It's a Samsung yes. I know, too much stuff 😭. GSMArena says it supports power delivery 3

jacktherippah@lemmy.world · 2 pts · 1y (1 reply)

I use Samsung's T4510 charger and cable combo. For third party chargers I believe they need to be PD PPS3.0 and the cable needs to be 5A.

ByteMe@lemmy.world · 1 pts · 1y

Thanks!

limerod@reddthat.com · 1 pts · 1y

You need a charger that supports PD and PPS charging at 45w or higher. Check if the charger supports that spec and you should be fine.