I’m trying to set up a quick-connect system for my natural gas crawfish boiler and could use some guidance. Here’s my setup:
- Gas line on patio: 1/2" female threads
- Boiler connection: 3/4" male threads
I want to use quick-connect fittings so I can easily detach the boiler and store it in the garage. My initial thought was:
- A 1/2" male quick-connect for the gas line
- A 3/4" female quick-connect for the boiler (though I recognize I might need an adapter)
- A compatible hose to link them
But I’m struggling to find a straightforward kit or parts that match these sizes. Am I missing something? Are there adapters or specific brands that simplify this?
Edit: Thank you @hex123456 and @David_Eight! I got it figured out. In case anyone finds this for a similar setup, here is what I did:
6 Comments
hex123456@sh.itjust.works · 3 pts · 1y
Pretty sure you have it backwards. The female quick connect has an auto-shutoff valve built in so should be on the supply side for safety even if you have a ball valve to turn it off manually.
bolbies@lemmy.world · 1 pts · 1y
That's a really good point. I do have it backwards then. Thanks!
MysteriousSophon21@lemmy.world · 1 pts · 1y
This is 100% correct - the female quick connect should ALWAYS be on the supply side for gas saftey, since it has the auto-shutoff valve that prevents gas from flowing when disconnected.
David_Eight@lemmy.world · 3 pts · 1y
Are you saying that the male thread in the photo is 3/4 inch? Because you measure the inside diameter to get the size of the pipe.
bolbies@lemmy.world · 1 pts · 1y
Okay they just both be 1/2" then. Thank you!
hex123456@sh.itjust.works · 2 pts · 1y
Local BBQ or fireplace store would have this sort of stuff.