That is really loud 🤔
It doesnt look like you have a lot of space for dampening tho sadly. If it has a hole for oiling it you can try that, otherwise i would try a different motor.
Maybe a mini stepper motor? Those are more complicated to control but if you add a microcontroller it would give you a lot of potential for more unpredictable/erratic movement of the toy and reversable directions which the cats might find fun.
I mean the motor is actually smaller than the cap that it's spinning around, I probably have an inch and a half of space around the thing, only thing is, it's an open gear box for some reason, so I don't want to go sticking cotton or something in there to deafen it, I could oil it sure but its a brand new motor it theoretically should be pretty smooth.
Another thing that may be affecting this is weight distribution, the "slot" for the motor arm is more or less just hot glue, it has a good grip but I doubt its totally center, and I bet that matters with this wide of a balance it has to compensate for.
Idk I might try and 3d print another one with a custom slot but getting the threads right for the toys arms might be a bit of a bitch
Idk what the motor looks like but im thinking that if you have a 3d printer then you could make a cover that goes around the gearbox and then afters is nice and sealed you can wrap it in fabric or rubber or something. I dont think the friction or vibration of the motor arm would cause such a high pitched noise.
13 Comments
pageflight@lemmy.world · 6 pts · 347d
Does it get cat approval?
jared@mander.xyz · 5 pts · 347d
Maybe grease the gears, or slow it down?
unexposedhazard@discuss.tchncs.de · 3 pts · 347d
That is really loud 🤔 It doesnt look like you have a lot of space for dampening tho sadly. If it has a hole for oiling it you can try that, otherwise i would try a different motor.
Maybe a mini stepper motor? Those are more complicated to control but if you add a microcontroller it would give you a lot of potential for more unpredictable/erratic movement of the toy and reversable directions which the cats might find fun.
StarvingMartist@sh.itjust.works · 2 pts · 347d
I mean the motor is actually smaller than the cap that it's spinning around, I probably have an inch and a half of space around the thing, only thing is, it's an open gear box for some reason, so I don't want to go sticking cotton or something in there to deafen it, I could oil it sure but its a brand new motor it theoretically should be pretty smooth.
Another thing that may be affecting this is weight distribution, the "slot" for the motor arm is more or less just hot glue, it has a good grip but I doubt its totally center, and I bet that matters with this wide of a balance it has to compensate for.
Idk I might try and 3d print another one with a custom slot but getting the threads right for the toys arms might be a bit of a bitch
unexposedhazard@discuss.tchncs.de · 2 pts · 347d
Idk what the motor looks like but im thinking that if you have a 3d printer then you could make a cover that goes around the gearbox and then afters is nice and sealed you can wrap it in fabric or rubber or something. I dont think the friction or vibration of the motor arm would cause such a high pitched noise.
itsathursday@lemmy.world · 3 pts · 347d
What kind of motor is in it? I recently bought a 2.5rpm motor and have yet to test it. Hopefully it’s not this loud…
StarvingMartist@sh.itjust.works · 3 pts · 347d
https://a.co/d/ecbOUjg nah this one's 50
callcc@lemmy.world · 2 pts · 346d
Look into BLDCs maybe the ones for gimbals as you need very low rpm.
keepee@lemmy.world · 2 pts · 347d
Are you using straight cut gears?
StarvingMartist@sh.itjust.works · 2 pts · 347d
Not sure, do you mean like, angled real sharp? Because I believe there's a bit of a rounded fillet on the teeth of the gears
keepee@lemmy.world · 3 pts · 343d
https://en.m.wikipedia.org/wiki/Spur_gear
Look into helical gears
StarvingMartist@sh.itjust.works · 2 pts · 343d
Yeah that's what they look like
CrimeDad@lemmy.crimedad.work · 1 pts · 346d
Food grade lubricant?