Recently I started printing on Bambulab (previously on Průša Mini). If anyone is curious about how much difference is it
Plate difference
Recently I started printing on Bambulab (previously on Průša Mini). If anyone is curious about how much difference is it
18 Comments
RandomLegend@lemmy.dbzer0.com · 10 pts · 3y
Its not about the size... Its about how you use it... Or something like that
Honytawk@lemmy.zip · 2 pts · 3y
Yeah, but a bigger size allows you to use it better
UserNotFound@lemmy.world · 1 pts · 3y
It's called effiency
RandomLegend@lemmy.dbzer0.com · 1 pts · 3y
pfff... that's what THEY want you to believe 😄
j4k3@lemmy.world · 5 pts · 3y
Those are not comparable in market target or price point. This is like comparing a motorcycle saddle bag and a car trunk
sharkfinsoup@lemmy.ml · 4 pts · 3y
What are the dimensions of each plate?
TwanHE@lemmy.world · 5 pts · 3y
180x180 Vs 254x254 iirc
LazaroFilm@lemmy.world · 6 pts · 3y
And then there’s my 5 years old Hypercube Evolution at 300x300 mm (or 1ft x 1ft)
Tenthrow@lemmy.world · 7 pts · 3y
I got a CR10 Max. 450x450mm
LazaroFilm@lemmy.world · 4 pts · 3y
And on the other end there’s my MP Select Mini 120x102mm
Tenthrow@lemmy.world · 2 pts · 3y
Nice. I had one of those back in the day, but gave it to a friend.
kale@lemmy.zip · 3 pts · 3y
I've got one now with a V6 knockoff hot end, steel PEI print bed, and running klipper firmware. It was backup printer, and now it's the backup to the backup (purchased Comgrow $70 used Ender 3 pro).
I'd like to give this to a friend that's interested in printing, but I'd have to flash back to stock firmware. The buttons and display don't work with klipper, and I don't have a spare raspberry pi.
It's still relevant with the upgrades I made to it, except it's still has really noisy steppers, and the build volume is so small it's really limiting. I think the Prusa mini is still large enough to be practical. The monoprice is mostly relegated to toys.
I need some 18650 holders for a project which the mini can do great with, but I need a lot and printing them two or three at a time won't cut it.
LazaroFilm@lemmy.world · 2 pts · 3y
I left mine in our family vacation house to print spare parts in the summer.
UserNotFound@lemmy.world · 2 pts · 3y
Nice. Personally, I don't think that I could find use for that size. I wanted little bigger than 220x220mm because projects
CmdrShepard@lemmy.one · 3 pts · 3y
I got a 300x300mm Sidewinder X2. It's just big enough to fit my noggin and therefore print a helmet capable of fitting my noggin.
Tenthrow@lemmy.world · 1 pts · 3y
Yeah that is a tough size if it's all you have. When I fist got mine I had just the mini and a CR10s 400 which is 400x400mm so anything I could get away with on the little guy I did and kept the big projects on the monster.
9thSun@midwest.social · 2 pts · 3y
How do you like the difference?
UserNotFound@lemmy.world · 1 pts · 3y
Very much. Can print bigger projects, or smaller one with more parts on the same plate (for example, rims for rc car, which is technically part of the bigger project)