I would have hundreds of these if I had a printer. My hubby is thinking about one for his drine stuff while I'm secretly plotting to make pots for all my plants. Love the planters! Super cute.
For anyone thinking of doing similar, you can get pretty sturdy planters/pots/vases using vase mode but with really thick extrusions, like in PrusaSlicer setting the extrusion width to something like 0.8mm (using .4mm nozzle). Takes a lot of the fragility and flexing out of vase-mode prints, and it's surprising how thick extrusions you can make with a regular .4 nozzle.
The effect off the blue walls is intriguing, not to be a geek but was this a setting in your slicer or a printer limitation? Just wondering because it really looks very cool like a woven effect I dig that!!
On a side note: God mobile Thingiverse is still awful. Shame what that site has become, no wonder printables now has an import tool.
23 Comments
Wermhatswormhat@lemmy.world · 6 pts · 3y
Those are super cool! Would you be willing to share the print files?
Wilshire@sh.itjust.works · 4 pts · 3y
Oddish
Cactus Vase
Mohkia@lemmy.world · 5 pts · 3y
I would have hundreds of these if I had a printer. My hubby is thinking about one for his drine stuff while I'm secretly plotting to make pots for all my plants. Love the planters! Super cute.
Wilshire@sh.itjust.works · 1 pts · 3y
Thanks! I wish I had bought one a long time ago, but they're sooo much cheaper now. Planters are my favorite thing to print.
Kuma@lemmy.world · 4 pts · 3y
I really like the teal color. Looks great!
Haatveit@beehaw.org · 4 pts · 3y
For anyone thinking of doing similar, you can get pretty sturdy planters/pots/vases using vase mode but with really thick extrusions, like in PrusaSlicer setting the extrusion width to something like 0.8mm (using .4mm nozzle). Takes a lot of the fragility and flexing out of vase-mode prints, and it's surprising how thick extrusions you can make with a regular .4 nozzle.
Wilshire@sh.itjust.works · 2 pts · 3y
I use higher temps, 2mm layer height, 0.6mm line width, with a 0.4mm nozzle. I find that going higher than 150% has an effect on my surface quality.
Haatveit@beehaw.org · 1 pts · 3y
True, it does affect surface quality a bit, but I found that for some uses, it's was actually desirable or at least tolerable
Wilshire@sh.itjust.works · 1 pts · 3y
Yes, 200% is definitely water tight.
Gompje@lemmy.world · 3 pts · 3y
The effect off the blue walls is intriguing, not to be a geek but was this a setting in your slicer or a printer limitation? Just wondering because it really looks very cool like a woven effect I dig that!!
On a side note: God mobile Thingiverse is still awful. Shame what that site has become, no wonder printables now has an import tool.
Wilshire@sh.itjust.works · 2 pts · 3y
I added fuzzy skin in PrusaSlicer, but the walls were too thin and I used 0% infill. They drain really well!
kenblu24@lemmy.world · 1 pts · 3y
I saw someone on the 3Dprinting subreddit say that they'd just been hired by Ultimaker/cura to help fix Thingiverse. I've noticed some improvements...
EdTheLegendary@programming.dev · 3 pts · 3y
Nice! Is that mother of millions in the pot with a face?
Duckherder@lemmy.world · 3 pts · 3y
They're adorable!
GrouchyLady@lemmy.world · 3 pts · 3y
I love it!
Classy@lemmy.world · 3 pts · 3y
Nice K. diagremontiana! Mine grew so damn big I had to chop its head off.
Yes I did a bit of color correcting, it was for a joke about Etsy posts and I can't find the original now
Wilshire@sh.itjust.works · 3 pts · 3y
I found them on the roadside in Florida growing like a weed, and ofc I took one home.
curioushom@lemmy.one · 3 pts · 3y
The blue one is super cute but I love the look of the cactus one! So thematic.
Duckherder@lemmy.world · 2 pts · 3y
hydra@lemmy.world · 3 pts · 3y
Looks pretty! I dig the cactus one at the right. The next one could be a mario pipe, don't you think?
Wilshire@sh.itjust.works · 4 pts · 3y
You know what... I could use some venus fly traps.
kiithwarrior@beehaw.org · 3 pts · 3y
That's awesome!
Byakko@lemmy.world · 2 pts · 3y
Wow so cute :3
MrJukes@lemmy.world · 1 pts · 3y
So cute!