Notsosuperfloh

u/Notsosuperfloh@discuss.tchncs.de
0 posts · 50 comments

Recent posts

No posts.

Recent comments

on A bug in the system. · c/askelectronics · 2 pts · 185d

I'd desolder the burnt ic and check if there is a short across the 16v caps. if there is no short power it and check if any of the 16v caps has any voltage on them. if theres no voltage on any of them also remove ic8. if you have a lab psu set it to 5v and current to 0.1 amp and inject it to the 16v caps and if you're lucky it powers up. if not slowly turn the voltage up until something happens. if it's working get a buck converter and solder the input to the 35v cap set it to to the same voltage as the psu and solder the output to one of the 16v caps.

id say 5v should do, as those caps go directly to ics. if both, ic7 and ic8 work independently from each other probably need to inject 5v to at least two of those 16v caps.

Überstunden werden ab 15 minuten bezahlt.

Wenn man 5 minten länger brauch schlägt man einfach die restliche zeit mit tratschen tot.

Arbeitsbeginn ist 05:45, wenn man 5 minuten später kommt ist es auch egal, solangs ned jeden tag ist.

Umkleidezeit fällt gesetzlich in die Arbeitszeit, ist also auch kein Problem.

Ich würd nicht jeden Tauben als Taubstumm bezeichnen, aber wenn wer weder hört noch die stimmbänder benutzen kann, sprich bringt keinen einzigen Laut raus, ist er Taubstumm.

dann kannst evtl. noch essig probiern. oder chlor, aber dann nur wenn die schüssel weiß ist, da sie sonst unter umständen helle flecken hat die nicht mehr weg gehen.