Yeah, that sounds excellent. By the end of the official route I found myself longing to break away from the group. It sounds like you have that figured out.
I did RAGBRAI a couple of years ago with a friend!
It was really fun and I recommend it to people all the time. My favorite memory was a guy running a slip n slide in his front yard, offering free jello shots to everyone who went down it.
That said, I'm not sure I'd do it again. The days (and especially the food) felt very same-y by the end of the week.
I still have my hesitation about both this company and this phone, and they clearly have a lot of UX improvements to make, but I don't hate what I see, and I'm keeping my reservation for a Communicator.
I'm so tired of big glass slabs, and I'm hopeful that the smaller screen will help encourage me to have better habits with respect to doom scrolling and video watching.
This parade made demands. This parade called out specific local, state, and federal politicians and campaigned against them. This parade encouraged people to register to vote, to check their registration to vote, and to vote for specific platforms and people.
And even if it had done none of that, it was still a positive experience for me to go. I liked this parade.
The one I went to in my city was the biggest crowd I'd ever seen downtown! I hear lots of people say that these protests are useless, but I don't think so. I felt really encouraged to see so many people, and I'm sure others did too.
Statically, that's not true, and is bordering on decades-old fear mongering about EVs.
In modern EVs, the battery will likely outlast the car body it is sitting installed in, or at least match the expected lifespan of the vehicle. There are a few EVs on the road right now with battery packs that have been driven many hundreds of thousands of miles.
The upfront cost of EVs is still a problem, but most people won't need to spend thousands on a new or refurbished battery pack after a few years.
I really wish they were not using a Mediatek chip so there would be custom ROM support. That said, this does seem like a good choice, especially for the relatively low cost of the Communicator.
I can't really give you a step-by-step guide, but here's the gist of how I did it: I have a dexcom CGM, and use the dexcom share functionality in the app to sync the CGM data to a Home Assistant plug in. From there, the blood glucose data is treated like any other sensor value in Home Assistant, so the sky is the limit.
How you could implement this for your mom would depend on what brand of CGM she can get, and the level of tech aversion or savvy she is.
xDrip and Nightscout are excellent projects which would also help you make something that uses or displays CGM data, if you didn't want to use Home Assistant.
Little devices like this are popular amongst some Diabetics for displaying their continuous glucometer data (I built something similar using an eink screen and the Dexcom home assistant integration). It's fun to see what people use these for!
A helpful list!
I think an additional point worth mentioning is that a heated blanket can keep you warm while consuming much less electricity than a space heater can.
The three drinks I'm making for my New Year's celebrations are:
Mimosas (I like mine with pineapple juice!)
Whiskey sour. I have some orange-infused synple syrup from making candied orange peals and it's an excellent addition to the traditional whiskey sour.
I'm not sure what the proper name is (or if there is one), but I've been enjoying what I've called a "Christmas Morning:" 2 oz each of espresso and good, non-alcoholic eggnog, 1 oz each of amaretto and congac. It's delicious. If anyone knows if this already has a name, please tell me!
I'm sorry about your friend. Enjoy the bike, especially if they specifically left it for you. Maybe do a few rides specifically in memory of them?
Yeah, that sounds excellent. By the end of the official route I found myself longing to break away from the group. It sounds like you have that figured out.
I did RAGBRAI a couple of years ago with a friend! It was really fun and I recommend it to people all the time. My favorite memory was a guy running a slip n slide in his front yard, offering free jello shots to everyone who went down it.
That said, I'm not sure I'd do it again. The days (and especially the food) felt very same-y by the end of the week.
I'm currently an engineer at a hardware tech startup. It is crazy how much upfront capital is needed, even just to build non-form factor test devices.
I still have my hesitation about both this company and this phone, and they clearly have a lot of UX improvements to make, but I don't hate what I see, and I'm keeping my reservation for a Communicator.
I'm so tired of big glass slabs, and I'm hopeful that the smaller screen will help encourage me to have better habits with respect to doom scrolling and video watching.
This parade made demands. This parade called out specific local, state, and federal politicians and campaigned against them. This parade encouraged people to register to vote, to check their registration to vote, and to vote for specific platforms and people.
And even if it had done none of that, it was still a positive experience for me to go. I liked this parade.
The one I went to in my city was the biggest crowd I'd ever seen downtown! I hear lots of people say that these protests are useless, but I don't think so. I felt really encouraged to see so many people, and I'm sure others did too.
Statically, that's not true, and is bordering on decades-old fear mongering about EVs.
In modern EVs, the battery will likely outlast the car body it is sitting installed in, or at least match the expected lifespan of the vehicle. There are a few EVs on the road right now with battery packs that have been driven many hundreds of thousands of miles.
The upfront cost of EVs is still a problem, but most people won't need to spend thousands on a new or refurbished battery pack after a few years.
Here's a well-made (and broadly pessimistic) source if you're interested: https://www.nature.com/articles/s41560-024-01698-1
This is what I installed last year after I got an open box model online for a significant discount. It was easy to set up and works great with HA.
I really wish they were not using a Mediatek chip so there would be custom ROM support. That said, this does seem like a good choice, especially for the relatively low cost of the Communicator.
Ok great! Best of luck and have fun.
I can't really give you a step-by-step guide, but here's the gist of how I did it: I have a dexcom CGM, and use the dexcom share functionality in the app to sync the CGM data to a Home Assistant plug in. From there, the blood glucose data is treated like any other sensor value in Home Assistant, so the sky is the limit.
How you could implement this for your mom would depend on what brand of CGM she can get, and the level of tech aversion or savvy she is. xDrip and Nightscout are excellent projects which would also help you make something that uses or displays CGM data, if you didn't want to use Home Assistant.
Little devices like this are popular amongst some Diabetics for displaying their continuous glucometer data (I built something similar using an eink screen and the Dexcom home assistant integration). It's fun to see what people use these for!
A helpful list! I think an additional point worth mentioning is that a heated blanket can keep you warm while consuming much less electricity than a space heater can.
The three drinks I'm making for my New Year's celebrations are:
Mimosas (I like mine with pineapple juice!)
Whiskey sour. I have some orange-infused synple syrup from making candied orange peals and it's an excellent addition to the traditional whiskey sour.
I'm not sure what the proper name is (or if there is one), but I've been enjoying what I've called a "Christmas Morning:" 2 oz each of espresso and good, non-alcoholic eggnog, 1 oz each of amaretto and congac. It's delicious. If anyone knows if this already has a name, please tell me!
I was handed this tract once! It is so bad it's hysterical.
Sadly, no. She is much, much better than the typical Ohio politician. Granted, the bar is in hell, so that isn't saying much.
I think people get that it's sarcasm, but it's still horrible enough to warrant a down vote anyway.
Has he released the files for this, yet? I just looked at the video again and it didn't look like he had.
I do want to give it a try once he's released them.
A guy made an intractables guide (and an accompanying youtube video) that would be an excellent starting point for you: https://www.instructables.com/Recycle-Cardboard-Into-Anything-With-3D-Printing/
It's a bit involved and messy (and will ruin your blender if you do this a lot), but you can get totally usable parts from this method!