Looks way worse than it is. Clean it out and add salt. The resin should be fine, they're rated for like 15 years. I'm sitting at 20 years with mine and it still does a fine job. In fact, by happenstance a buddy works for Culligan and he doesn't even bring up replacement unless the unit shows actual problems keeping water soft, regardless of age.
E. Another user mentioned bacteria, which can definitely be a cause for concern if the unit was sitting for that time, but should be less of an issue if it was just used without salt and NOT on bypass. Especially considering softeners typically have a pre-filter that sits in untreated water for 4-6 months at a time and a softener doesn't sterilize water in any way. So you're getting same bacteria regardless.
Hey thanks for sharing! I'd love to set one of these up for my kid (he's 4) to play old emulators with. Is there a way to get it working in a kiosk type mode where he can't get lost in a system menu or otherwise "stuck" outside of a game? I know I've configured emulators to auto launch roms before,, but can the psp be setup to auto launch the emulator on startup, for example?
Yes, randomly had my first zebra cake in ~25 years and holy shit are they awful. Not only smaller but really dry. I used to walk the long way home (an extra half mile!) to slam down a hard earned quarter for one of those things in my youth. Threw the fuckin box out after three bites.
Which slicer do you use? There is a setting a that can improve water retention capabilities with just a check box. I think it's called "stagger perimeters" in Bambu for example. Also use at least 3 walls. Some good tests and examples on YouTube by "Designed to make" if you're curious.
I am about the same age and my 4 year old is going through something similar, though admittedly less severe. I want to preface by saying he's my first child and I don't know what I'm doing and likely never will.
That said, I've made some progress over the last few months by forcing him to face smaller and less impactful disappointments. For example, he wanted ice cream at the grocery store, which is not something we typically buy but instead of saying no, I told him we could get ice cream, just not the one he wanted. I wanted vanilla and he wanted chocolate. As soon as he started to whine that "it's not what he wanted" I reminded him the other option was none. Ice cream won, he was stoked and there was no melt down this time.
I've been doing the same thing in other ways here and there. "Yes I'll play with you, but no I won't play that game, how about this one?" And I just stay firm on the boundary of how with the alternative being "no" and fully accepting that a meltdown might ensue. I've noticed little by little he just seems to be freaking out less and less.
With meltdowns, the only way out is through, I've been told.
On the hand washing thing, I am guessing it's a sensory problem. The water is too hot or too cold or too wet, something like that. I think you should cut him slack here, bodies are weird and this may be hard for him in a way that doesn't make sense to you. Using sanitizer or a water-free hand soap is an option to reduce hand washing frequency, might make it easier on everyone.
The place I take my car actually has the guys wearing little GoPro style body cams and they talk you through the work they are doing as they do it for your review after. Anything they touch gets recorded and you get pretty much an uninterrupted cut of the whole job. I was really impressed with the professionalism. Not the reason I went there in the first place but the honesty and transparency are why I keep coming back.
Anyhow just wanted to point out it's entirely possible to run a repair business without talking shit about your customers or their property while also treating their possessions with respect.
Root rot happens due to lack of oxygen, specifically, which is needed as part of nutrient transport, fwiw. As water is absorbed in a plant, it recedes within the soil. This causes air to get pulled in which delivers fresh oxygen to the root system. Frequent over watering impedes this process and causes the roots to necrotize, which helps feed fungus and mold in the soil, which further erodes the root system and exacerbates the rot.
Root rot usually presents as multiple problems at once since, just as a rule of thumb. This image however was definitely nitrogen. Super common in elder big leaf and younger fast growing plants.
This is correct. Yellowing leaves starting at the bottom and working their way up is nitrogen, which is a mobile nutrient and can be moved from old leaves (bottom) to new (top) in order to support growth.
Root rot was suggested elsewhere in the thread but that typically presents with browning of leaves with no specific locality.
Buddy, get your head out of the sand. The Internet isn't half as gruesome as it used to be. Do you know how we used to find all the beheading videos? Just search YouTube! Sure, they are still there, somewhere, but definitely no longer popping up in my recommendation feed. Further, nowadays, content creators won't even use the word Sex on that platform for fear of demonization.
And yet why the sudden push to protect the children? You need look no further than Sam Almans "worldcoin" and similar projects for your answer, my guy.
I am begging you not to elaborate here.
Looks way worse than it is. Clean it out and add salt. The resin should be fine, they're rated for like 15 years. I'm sitting at 20 years with mine and it still does a fine job. In fact, by happenstance a buddy works for Culligan and he doesn't even bring up replacement unless the unit shows actual problems keeping water soft, regardless of age.
E. Another user mentioned bacteria, which can definitely be a cause for concern if the unit was sitting for that time, but should be less of an issue if it was just used without salt and NOT on bypass. Especially considering softeners typically have a pre-filter that sits in untreated water for 4-6 months at a time and a softener doesn't sterilize water in any way. So you're getting same bacteria regardless.
Hey thanks for sharing! I'd love to set one of these up for my kid (he's 4) to play old emulators with. Is there a way to get it working in a kiosk type mode where he can't get lost in a system menu or otherwise "stuck" outside of a game? I know I've configured emulators to auto launch roms before,, but can the psp be setup to auto launch the emulator on startup, for example?
Yes, randomly had my first zebra cake in ~25 years and holy shit are they awful. Not only smaller but really dry. I used to walk the long way home (an extra half mile!) to slam down a hard earned quarter for one of those things in my youth. Threw the fuckin box out after three bites.
Genuinely curious, why is everyone walking backwards at the ~7 second mark? Is that part reversed for some reason or is this slop?
Using a simple vpn would get you around this limitation but you'd take a performance hit.
Which slicer do you use? There is a setting a that can improve water retention capabilities with just a check box. I think it's called "stagger perimeters" in Bambu for example. Also use at least 3 walls. Some good tests and examples on YouTube by "Designed to make" if you're curious.
Bet they'd still count that as a user interacting with AI.
Well done there. 🏌️👏
I am about the same age and my 4 year old is going through something similar, though admittedly less severe. I want to preface by saying he's my first child and I don't know what I'm doing and likely never will.
That said, I've made some progress over the last few months by forcing him to face smaller and less impactful disappointments. For example, he wanted ice cream at the grocery store, which is not something we typically buy but instead of saying no, I told him we could get ice cream, just not the one he wanted. I wanted vanilla and he wanted chocolate. As soon as he started to whine that "it's not what he wanted" I reminded him the other option was none. Ice cream won, he was stoked and there was no melt down this time.
I've been doing the same thing in other ways here and there. "Yes I'll play with you, but no I won't play that game, how about this one?" And I just stay firm on the boundary of how with the alternative being "no" and fully accepting that a meltdown might ensue. I've noticed little by little he just seems to be freaking out less and less.
With meltdowns, the only way out is through, I've been told.
On the hand washing thing, I am guessing it's a sensory problem. The water is too hot or too cold or too wet, something like that. I think you should cut him slack here, bodies are weird and this may be hard for him in a way that doesn't make sense to you. Using sanitizer or a water-free hand soap is an option to reduce hand washing frequency, might make it easier on everyone.
Good luck!
The place I take my car actually has the guys wearing little GoPro style body cams and they talk you through the work they are doing as they do it for your review after. Anything they touch gets recorded and you get pretty much an uninterrupted cut of the whole job. I was really impressed with the professionalism. Not the reason I went there in the first place but the honesty and transparency are why I keep coming back.
Anyhow just wanted to point out it's entirely possible to run a repair business without talking shit about your customers or their property while also treating their possessions with respect.
Like when Jack and the Box used kangaroo and horse meat in their burgers?
Root rot happens due to lack of oxygen, specifically, which is needed as part of nutrient transport, fwiw. As water is absorbed in a plant, it recedes within the soil. This causes air to get pulled in which delivers fresh oxygen to the root system. Frequent over watering impedes this process and causes the roots to necrotize, which helps feed fungus and mold in the soil, which further erodes the root system and exacerbates the rot.
Root rot usually presents as multiple problems at once since, just as a rule of thumb. This image however was definitely nitrogen. Super common in elder big leaf and younger fast growing plants.
This is correct. Yellowing leaves starting at the bottom and working their way up is nitrogen, which is a mobile nutrient and can be moved from old leaves (bottom) to new (top) in order to support growth.
Root rot was suggested elsewhere in the thread but that typically presents with browning of leaves with no specific locality.
You're right, I just glanced at the thumbnail. It's easy to be on edge these days, my bad.
I'm going to leave my comment in solidarity with three legged people, though, if that's cool.
My favorite part about Japan is the three legs.
What is the worst thing humanity has ever invented?
I personally think it's running.
This gives me great hope for my box of obsolete cables and adapters.
Buddy, get your head out of the sand. The Internet isn't half as gruesome as it used to be. Do you know how we used to find all the beheading videos? Just search YouTube! Sure, they are still there, somewhere, but definitely no longer popping up in my recommendation feed. Further, nowadays, content creators won't even use the word Sex on that platform for fear of demonization.
And yet why the sudden push to protect the children? You need look no further than Sam Almans "worldcoin" and similar projects for your answer, my guy.