Already opened a ticket with Anbernic support. Hoping to hear back from them.
Based on further reading and research this is 100% a know issue. https://droix.net/blogs/is-your-anbernic-device-safe-or-not/#reports-on-the-internet
Edit: Support got back. Sent them video of the system not working, and this image. They offered a free replacement. Seeing how this plays out.
11 Comments
Arsecroft@lemmy.sdf.org · 16 pts · 307d
looks like an easy fix if you get a replacement part and a soldering iron
Poach@lemmy.world · 8 pts · 307d
Assuming that it failed on its own. Very likely something downstream may have caused it...
the16bitgamer@programming.dev · 8 pts · 307d
Based on what I read about these system, it might've overcharged and failed. Defiantly hoping for a replacement or a refund.
moody@lemmings.world · 6 pts · 307d
Why so defiant?
the16bitgamer@programming.dev · 3 pts · 307d
Because the auto correct for definitely, is extremely close that I didn't tell the difference :D
Arsecroft@lemmy.sdf.org · 3 pts · 307d
good luck!
Colloidal@programming.dev · 11 pts · 307d
The magic smoke came out, it don't work without it.
tetris11@feddit.uk · 1 pts · 297d
what's the part that I'm supposed to be looking at - it looks fine to me
the16bitgamer@programming.dev · 2 pts · 297d
Zoom into the middle you’ll see a black chip which is bulging
tetris11@feddit.uk · 2 pts · 297d
ah there it is - thanks
IAMgROOT@lemmy.wtf · 0 pts · 81d
clean board with isophrophyl alcohol thoroughly and then replace the component