c/steamdeck · by InternetCitizen2@lemmy.world · 244dSteam Deck Enclosure [not OC] 325 points · 19 comments · view on lemmy.world
19 Comments
Fubarberry@sopuli.xyz · 29 pts · 244d
Looks pretty similar to this case, which was previously discussed in this community here.
Edit: here's this case: https://github.com/unkyulee/steamdeck-enclosure
InternetCitizen2@lemmy.world · 13 pts · 244d
So its even cooler than I thought!!!
ceenote@lemmy.world · 6 pts · 244d
Even if it's 3d printed and probably not too sturdy, that's still way thicker than it needs to be.
Nilz@sopuli.xyz · 19 pts · 244d
Those bezels are thicker than the original Steam Deck even.
SantasMagicalComfort@piefed.world · 28 pts · 244d
Thicker than a pixar mom.
Nima@leminal.space · 3 pts · 244d
and a bowl of oatmeal. they're thicker than that, too.
the_riviera_kid@lemmy.world · 17 pts · 244d
A mouse and the ability to charge it in the dock and this would be pretty cool even though its super bulky.
h54@programming.dev · 7 pts · 244d
It looks like the USB port may be exposed via that slot on the top?
the_riviera_kid@lemmy.world · 3 pts · 244d
You could be right, it is quite wide.
Jimbabwe@lemmy.world · 3 pts · 244d
I’ve read elsewhere that charging it while enclosed could be bad for it because of high temps, and it has been speculated that its orientation in the default case is such to prevent zipping up to each side of the charging cable.
jonathan@piefed.social · 3 pts · 244d
As far as I can see, this case exposes all the vents.
AmbiguousProps@lemmy.today · 1 pts · 244d
Do the fans come on during charging if you're not using it?
jonathan@piefed.social · 1 pts · 242d
Not in my experience, but it probably does need passive cooling.
Hello_there@fedia.io · 4 pts · 244d
Case looks overly thick. Reducing it down a bit would give you the space for a mini mouse
Encom@lemmy.world · 3 pts · 244d
There’s a version of the case (not sure if it’s THIS design) that has an extra printable section to fit the pebble mouse
Grass@sh.itjust.works · 6 pts · 244d
If we're going that thick I'd be inclined to model in hand grips and make the keyboard a hotswap switch mechanical
WolfLink@sh.itjust.works · 5 pts · 242d
Congrats you’ve invented a shitty laptop lol
chronicledmonocle@lemmy.world · 4 pts · 242d
Maximum chonk
Igilq@szmer.info · 1 pts · 243d
cool project, would fhag case fit keys-to-go 2 though? i think it is similiar