I’ve got the basics down, but now looking to do something more complex, and unsure if it’s possible. I have imported a flat shape (a pcb), and I can extrude this out. What I want to do however is to rotate it on its axis, and then extrude it down the z-axis (not directly out from the surface). Is this possible, and if so, how?
8 Comments
mholiv@lemmy.world · 0 pts · 2y
I use OpenSCAD all the time. What do you mean by “then extrude it down the Z axis”? Happy to help. Just don’t know what you mean here.
nydas@lemmy.world · 1 pts · 2y
Thank you! So, you can get a regular 2D shape and use the linear_extrude() function to extrude out at 90 degrees from the object. They refer to in in the docs as the equivalent of pushing playdoh through a press. And from the docs ‘In OpenSCAD Extrusion is always performed on the projection (shadow) of the 2d object xy plane and along the Z axis; so if you rotate or apply other transformations to the 2d object before extrusion, its shadow shape is what is extruded.’
So the Z axis is no related to what I see on the screen, but is in direct relation to the original 2D image. If I were to first rotate the 2D image by 90 degrees, and then extrude, the extrusion would be on the Z axis relative to the 2D object, but the X axis relative to the rest of the project (if that makes sense).
What I want it to extrude on the absolute Z axis of the total project, regardless of the angle of rotation of the 2D object. To put it another way, if I were to have a square on the 2D, and I rotated it 30 degrees before extruding, I would not want a cube to be formed, but rather would want a rhombohedron.
lps2@lemmy.ml · 1 pts · 2y
You'll want to leverage hull! First linear extrude your PCB shape just to make it 3D, you can do something like 0.00001 then rotate to your desired angle. Make this a module then call it twice, once at wherever you want it and once more but translated on the z-axis by however high you want to "extrude". Wrap these two up in a hull and you're good to go!
nydas@lemmy.world · 2 pts · 2y
That’s awesome, thank you so much!
mholiv@lemmy.world · 1 pts · 2y
A bunch of people beat me to it but yah hill between two objects is the way to go. Linear_extrude is best thought of as a purely 2d operation that produces a 3d object.
lps2@lemmy.ml · 2 pts · 2y
Note that this will always be convex, if your 2d shape has "holes" you'll want to get a bit more creative, I like to do a difference to create the "negative" as a 3D shape, do the same exercise as above but translate slightly higher and lower and use 'difference' to create your final shape
luckybipedal@lemmy.world · 1 pts · 2y
I've done something like that with a multmatrix transformation. There is an example of doing a skew transformation like that in the OpenSCAD user manual. This works with any 3D shape, not just extrusions. So you could transform a cube into a parallelepiped.
wolfwood@lemmy.world · 1 pts · 2y
hull() between 2 cubes would be my strategy for rhombo