The Subaru ej22 is a popular engine for people to swap into vintage VWs as the the flat-four piston arrangement is similar to the air-cooled “pancake” engines that came in the VWs. If I can find a cheap enough donor car, I will be putting an ej22 in my VW bus
I decent 1080p video file can be around 3 Mbps. I thought my setup would be fine since I pay for 30 Mbps upload speeds, but it seems I don’t actually achieve that outside of my local area. I would fear that a cloud machine would suffer the same rate limit
Original fuel and ignition though the fuel pump, lines, plugs, and other wear items are fairly new. I’m pretty sure that the boots from the intake manifold are not creating a good seal so more air than the MAF is counting is getting in. I’ll replace those and see if the issue persists.
Since it is a ceiling fan you’re going to want it to be strong. I see two options here
Get a tap set and re-thread the holes a little larger and get new bolts
Or
Bolt the bracket for the fan to the stud directly instead of using the electrical box. Lots of fan bases are large enough that you can do this while still being able to hide the electrical box under it
Just out of frame there is an extinguisher mounted
So cute! Thanks PoopSpiderman
They promised progreland
Brass McKnuckles
The Subaru ej22 is a popular engine for people to swap into vintage VWs as the the flat-four piston arrangement is similar to the air-cooled “pancake” engines that came in the VWs. If I can find a cheap enough donor car, I will be putting an ej22 in my VW bus
I decent 1080p video file can be around 3 Mbps. I thought my setup would be fine since I pay for 30 Mbps upload speeds, but it seems I don’t actually achieve that outside of my local area. I would fear that a cloud machine would suffer the same rate limit
I should’ve specified that I’m concerned about the drop in upload speed not download
Cable internet from Optimum (formerly suddenlink)
I should clarify I’m trying to troubleshoot my upload so my brother can use my Plex server easier.
Ok fine 93.3%. I didn’t think that was very important
I’ve seen it. Honestly would not recommend. It’s silly as you’d expect but it’s very amateur and not very good
They’re not just following gm, they’re using gm’s ultium ev platform. It would make sense that they would use the same charging connector
Youth in Asia
Tuber
I use winget and don’t have to touch edge
We’re gonna run out of Lemmy users quick
Since it is a ceiling fan you’re going to want it to be strong. I see two options here
Get a tap set and re-thread the holes a little larger and get new bolts
Or
Bolt the bracket for the fan to the stud directly instead of using the electrical box. Lots of fan bases are large enough that you can do this while still being able to hide the electrical box under it
o7