Ah that i did not know, thanks for setting that straight. But still i do find the two dots above the u, not real english.
I also had to use the /s appearantly with the dutch name.
Why my account is a bot, I have no clue. Last time i felt human.
If text is in english, please use the english word for the country Turkey. With its new electrified lithiumpowered dykes, Nederland is again lead in fighting the water! Well, guess where i come from!
I am getting the same issue. Also have my current system in solar shed (3m3) and want to upgrade. It cools off here in winter -20. An idea would be to have at least an insulated space + exhaust fan on too high temp and two series places h4 headlights (=48v) switched on below 0 and turn off at 2 ( how?) would give enough heat to heat the insulated space. I am struggling with the triggering though. Also there are heat mats for ea seedling heating or pet heating. How to switch on/off though. I use home assistant at home but its way too bulky for a "thermostat switch". Only if i could find an old refridgerator for the switch.
Thanks of sharing your information. I was a bit frustrated but I would expect you also were last month. The spool that I bought new, could have been in a place where it could be moist. I'm not sure what the plastic is but if it's nylon it can absorb quite some moisture and then the yielding strength will drop? After I had changed the original spool with the spool with previous breaking cheap wire, it went better but could not get my finger on why. Perhaps the hole has been worn out.
Your suggestion of another trimmer head I will look into. The trimmer start to vibrate more so I'll check the bearing and see if the trimmer is disassembable (if that's a word)
Good question. Complexities I can think of is the massive power that needs to flow between battery and motor requires a very big plug that needs to be removed and placed again 2 often. And that the cooling design of the battery is in the way of the modularity of the battery which makes it more complex to design
Indeed, it's actually Wattpeak. For my work I make a difference between actual Watts and solar Wattpeak. I normally multiply by 0,75 to get the MAX power. This max power only occurs around noon as the sun goes up and down again. For energy in my home (Lithuania) I hope to get in the summer with 1kwh/M2/day from the solar panels.
There are geological overlays graphs available that give indication on how much kWh you can get. Solar atlas is one of them. Look for kWh/kWp, multiply it by your solar installation size and you have your average available intake of energy. You can find the kWh/kWp on average per year,month and day. So you know in winter that you produce a lot less than summer
Working on irrigation to all corners of my piece of land. Digging meters and meters and putting HDPE pipe connectors with water sockets. Digging is heavy work but I needed a workout actually
Wauw, that's quite a setup. Nevermind the state of things, there is always room for improvements. First is that it works. Your intake of solar is quite low compared to your battery size. Are you also aiming for more solar and bigger inverter then? Otherwise it will take days to fill 18kwh.
I am also aiming for a ton of water to be heated, both firewood and solar but have to rebuild the sauna stove for that. To have both stone and water as thermal storage. The stone I aim to also feed with cold in the summer. But I have to think more on that as condens forming is something risky.
Hi, I am very curious on your inverter / battery setting as you said the heatpump is powered by solar. Do you have a hybrid setting or do you have batteries that buffer for the heatpump. As a heatpump is quite some power and needs to have a stable power supply
Ps, living not far from you (Lithuania) and I am interested to built these fence panels for the winter as well.
I have studied the drying of fruits for my work. To get optimal drying the temperature should be 45-60degC with an airflow in it. Of course this design would work but the fruits will take 3 days before the moisture content is around 10%> The design would need a bit more solar surface and a small fan to make the evaporation go faster and exchange the humid air. But it will be a bit more complex though. Small chimney would also work
Installing electricity lines are always finicky and cost me also a lot of effort. I understand your procrastination. Last week I have separated installing electricity lines by one line per evening (really one box and a line + the other side button/socket). And this helped greatly in overcoming the great effort of fixing stuff after work and dinner. The streak eventually ends and this week Factorio had me snatched up unfortunately.
Very interesting. I always look into this opensource flowbatteries as I recognize the advantages that are discussed in the video, easy scalable, cheap, safe and probably diy-able in the future. I would like to experiment with two IBC's in scale. Following the FAIR project as well. Thanks PoVoq
The same here, thinking of how to make a door in wooden interior for electric installation has gotten me almost insane. So many choices. And then comes the hinges, do I use the ones I have for recycling or new, hiding the hinges but that means more complexity. There is not much space and all I use are 2,5x5cm wood lengths. It required quite some though processes if it is not standardized. Also I'm too shoddy and impatient for nice clean sharp finish. Luckily this style is consistence though.
I'll try to share some pictures as that adds to the depth of the conversation
Check, Thnxs
Ah that i did not know, thanks for setting that straight. But still i do find the two dots above the u, not real english. I also had to use the /s appearantly with the dutch name.
Why my account is a bot, I have no clue. Last time i felt human.
If text is in english, please use the english word for the country Turkey. With its new electrified lithiumpowered dykes, Nederland is again lead in fighting the water! Well, guess where i come from!
I am getting the same issue. Also have my current system in solar shed (3m3) and want to upgrade. It cools off here in winter -20. An idea would be to have at least an insulated space + exhaust fan on too high temp and two series places h4 headlights (=48v) switched on below 0 and turn off at 2 ( how?) would give enough heat to heat the insulated space. I am struggling with the triggering though. Also there are heat mats for ea seedling heating or pet heating. How to switch on/off though. I use home assistant at home but its way too bulky for a "thermostat switch". Only if i could find an old refridgerator for the switch.
Very interesting article. Thanks
So sad, there is nothing but contempt for life.
Google uses for their servers per year the amount of water fit in a building of 5m high, 100!m wide and 44km long. Yaiks
Thanks of sharing your information. I was a bit frustrated but I would expect you also were last month. The spool that I bought new, could have been in a place where it could be moist. I'm not sure what the plastic is but if it's nylon it can absorb quite some moisture and then the yielding strength will drop? After I had changed the original spool with the spool with previous breaking cheap wire, it went better but could not get my finger on why. Perhaps the hole has been worn out.
Your suggestion of another trimmer head I will look into. The trimmer start to vibrate more so I'll check the bearing and see if the trimmer is disassembable (if that's a word)
Good question. Complexities I can think of is the massive power that needs to flow between battery and motor requires a very big plug that needs to be removed and placed again 2 often. And that the cooling design of the battery is in the way of the modularity of the battery which makes it more complex to design
Indeed, it's actually Wattpeak. For my work I make a difference between actual Watts and solar Wattpeak. I normally multiply by 0,75 to get the MAX power. This max power only occurs around noon as the sun goes up and down again. For energy in my home (Lithuania) I hope to get in the summer with 1kwh/M2/day from the solar panels.
There are geological overlays graphs available that give indication on how much kWh you can get. Solar atlas is one of them. Look for kWh/kWp, multiply it by your solar installation size and you have your average available intake of energy. You can find the kWh/kWp on average per year,month and day. So you know in winter that you produce a lot less than summer
Working on irrigation to all corners of my piece of land. Digging meters and meters and putting HDPE pipe connectors with water sockets. Digging is heavy work but I needed a workout actually
Wauw, that's quite a setup. Nevermind the state of things, there is always room for improvements. First is that it works. Your intake of solar is quite low compared to your battery size. Are you also aiming for more solar and bigger inverter then? Otherwise it will take days to fill 18kwh.
I am also aiming for a ton of water to be heated, both firewood and solar but have to rebuild the sauna stove for that. To have both stone and water as thermal storage. The stone I aim to also feed with cold in the summer. But I have to think more on that as condens forming is something risky.
Hi poVoq, how is your solar solution holding up after 2 years?
Hi, I am very curious on your inverter / battery setting as you said the heatpump is powered by solar. Do you have a hybrid setting or do you have batteries that buffer for the heatpump. As a heatpump is quite some power and needs to have a stable power supply
Ps, living not far from you (Lithuania) and I am interested to built these fence panels for the winter as well.
I have studied the drying of fruits for my work. To get optimal drying the temperature should be 45-60degC with an airflow in it. Of course this design would work but the fruits will take 3 days before the moisture content is around 10%> The design would need a bit more solar surface and a small fan to make the evaporation go faster and exchange the humid air. But it will be a bit more complex though. Small chimney would also work
Ah, that sucks 1 step forward and back at the start
Installing electricity lines are always finicky and cost me also a lot of effort. I understand your procrastination. Last week I have separated installing electricity lines by one line per evening (really one box and a line + the other side button/socket). And this helped greatly in overcoming the great effort of fixing stuff after work and dinner. The streak eventually ends and this week Factorio had me snatched up unfortunately.
Very interesting. I always look into this opensource flowbatteries as I recognize the advantages that are discussed in the video, easy scalable, cheap, safe and probably diy-able in the future. I would like to experiment with two IBC's in scale. Following the FAIR project as well. Thanks PoVoq
They were not dying to find out, I hope?
The same here, thinking of how to make a door in wooden interior for electric installation has gotten me almost insane. So many choices. And then comes the hinges, do I use the ones I have for recycling or new, hiding the hinges but that means more complexity. There is not much space and all I use are 2,5x5cm wood lengths. It required quite some though processes if it is not standardized. Also I'm too shoddy and impatient for nice clean sharp finish. Luckily this style is consistence though.
I'll try to share some pictures as that adds to the depth of the conversation