Yeah, I'm totally fine with it. If the QR is read (sometimes it fails) I just type it in manually, usually the number next to the QR is readable on the scan.
Not totally ideal, but closest way to have separate binders I think.
We have a TP link TAPO camera, it sits on a VLAN without access to the internet. We can access and watch it through home assistant. There's a custom integration that allows for some control of the camera including motion control, motion and noise detection, though the basic integration should be fine by now for just the video and audio feed.
Since we have some notification set up when the motion or noise is triggered, we don't need to have the video feed open all the time (it even pops up on our Kodi TV). Though, we do use an old spare android phone as a dedicated baby monitor, but we're not tied to using just that one.
This is stationary for our home though and the initial setup of the camera does require internet connection, but after that... It all lives locally.
We also do have a cheap TrueLife video baby monitor, closed loop, with a dedicated receiver unit, but that is more of a travel solution. No fancy function, just video and audio feed from the camera to the parent unit. The range of this thing is rubbish though...
And when we don't need video feed, we use regular Motorola PMR walkie-talkies, one of them (on the child side) in VOX mode. Any baby monitor can only dream of its range and battery life...
So, that's our setup in a nutshell. If you'd like to know more, feel free to ask 😉
I have both the regular Xbox wireless controller and now the 8bitDo ultimate 2C.
And damn I love the 8bitDo one. The joysticks are far superior and pleasant, with zero play around the middle, on the Xbox controller they are a bit wonky and loose around the middle hence they don't zero out every time.
And it cost half of what I paid for the Xbox controller...
I too have a tp-link tapo indoor camera with said hacs component. I have set alerts for sound and movement, both work well, it need some tuning tough, like mic sensitivity...
For live video feed I use a webrtc camera from hacs as it has much better latency.
As a child monitor it works really well.
Same boat here, I have the 5 II and I absolutely love it. Great size, the camera is OK on auto but can do wonders in manual mode (depending on your skill).
The lack of software support is a bummer though. I was surprised it's not in LineageOS' official support anymore...
Definitely not intentional. Even if you are fidgeting with the power button, while being bored, the phone makes so much fuzz about it, when you hit the right combo. You would need to be deaf, blind or dead not to notice you're just about to call emergency. Or startled by the noise, panic and throw your phone out the window followed by a brick, hammer and grand piano...
Yeah, I'm totally fine with it. If the QR is read (sometimes it fails) I just type it in manually, usually the number next to the QR is readable on the scan. Not totally ideal, but closest way to have separate binders I think.
I just have to carefully count the zeros... 😅
I have achieved this by having several number rows for different binders. E.g.. :
Downside is, paperless treats it as a single ASN number row and reports the highest used.
Cheers, that makes sense.
Lidl. It's Parkside.
Cheers. Okay, now I even understand that little pictogram near it... So not very much use for me.
Eh, no wonder it looks shittier, I guess the whole set cost about the same as the one you mentioned... ðŸ¤ðŸ˜…
For inspiration I'll describe our setup:
We have a TP link TAPO camera, it sits on a VLAN without access to the internet. We can access and watch it through home assistant. There's a custom integration that allows for some control of the camera including motion control, motion and noise detection, though the basic integration should be fine by now for just the video and audio feed.
Since we have some notification set up when the motion or noise is triggered, we don't need to have the video feed open all the time (it even pops up on our Kodi TV). Though, we do use an old spare android phone as a dedicated baby monitor, but we're not tied to using just that one.
This is stationary for our home though and the initial setup of the camera does require internet connection, but after that... It all lives locally.
We also do have a cheap TrueLife video baby monitor, closed loop, with a dedicated receiver unit, but that is more of a travel solution. No fancy function, just video and audio feed from the camera to the parent unit. The range of this thing is rubbish though...
And when we don't need video feed, we use regular Motorola PMR walkie-talkies, one of them (on the child side) in VOX mode. Any baby monitor can only dream of its range and battery life...
So, that's our setup in a nutshell. If you'd like to know more, feel free to ask 😉
I have both the regular Xbox wireless controller and now the 8bitDo ultimate 2C. And damn I love the 8bitDo one. The joysticks are far superior and pleasant, with zero play around the middle, on the Xbox controller they are a bit wonky and loose around the middle hence they don't zero out every time. And it cost half of what I paid for the Xbox controller...
Knights and Merchants 😉 Older classic, but there's a remake that makes it more playable on modern machines
Also, at some point during manufacturing they hang it by the holes.
I too have a tp-link tapo indoor camera with said hacs component. I have set alerts for sound and movement, both work well, it need some tuning tough, like mic sensitivity...
For live video feed I use a webrtc camera from hacs as it has much better latency.
As a child monitor it works really well.
Olives
Never, they'll try again and again with different names, covered by different purposes and stuck to another law.
Nice ones! Since it ain't a server I haven't mentioned it, but I had my WiFi ssids named CLACKS.
Since I'm kinda fan of Terry Pratchett, I naturally have HEX at home.
It used to be the name of my character back when I played DnD, and the very origin was some online dwarvish names generator.
Same boat here, I have the 5 II and I absolutely love it. Great size, the camera is OK on auto but can do wonders in manual mode (depending on your skill).
The lack of software support is a bummer though. I was surprised it's not in LineageOS' official support anymore...
Do you use any custom ROM on your Xperia?
Gnome cleric
PIA
An X is an X, the social network shall be known as X, formerly Twitter /J
Definitely not intentional. Even if you are fidgeting with the power button, while being bored, the phone makes so much fuzz about it, when you hit the right combo. You would need to be deaf, blind or dead not to notice you're just about to call emergency. Or startled by the noise, panic and throw your phone out the window followed by a brick, hammer and grand piano...