My brother’s lab (not at MIT) has been 3D printing optically clear glass for years. They can do all sorts of shapes and figures, though I’m particularly fond of the Yoda heads.
If I’m reading this article correctly, the breakthrough they made was with the temperatures they can do it at, and it’s much less to do with the novelty of 3D printing glass.
So it’s much less “hey, this is amazing, nobody has ever done this before,” and far more “we did this cool thing in a new and harder way!”
While you are technically correct, gigabit almost universally refers to speeds, and not size. You can probably blame the ISPs for that, since they love to advertise “gigabit service” and drop the bit about “per second.”
I think you’re misreading that as “10 GB of data,” when it’s actually download speeds of 10Gb/s. I looked it up, and there doesn’t seem to be a data cap.
The flight manifests were also released, with passenger info and other flight data confirming the status of some people who had been disappeared. The hacker said they were able to access GlobalX’s AWS buckets to grab and delete data, and they also sent messages to the flight crews directly.
Waymo can absolutely drive at night, I’ve seen them do it. They rely heavily on LIDAR, so the time of day makes no difference to them.
And apparently they only disengage and need human assistance every 17,000 miles, on average. Contrast that to something like Tesla’s “Full Self Driving” (ignoring the controversy over whether it counts or not), where the most generous numbers I could find for it are a disengagement every 71 city miles, on average, or every 245 city miles for a “critical disengagement.”
You are correct in that Waymo is heavily geofenced, and that’s pretty annoying sometimes. I tried to ride one in Phoenix last year, but couldn’t get it to pick me up from the park I was visiting because I was just on the edge of their area. I suspect they would likely do fine if they went outside of their zones, but they really want to make sure they’re going to be successful so they’re deliberately slow-rolling where the service is available.
They’re still working on it. All the dev is by a single guy, who also runs Pixelfed. He says he’ll be open-sourcing the code soon so more people can contribute and help get things going, but he wants to finish getting the web interface working first. And apparently he’s been spending a lot of time keeping everything online during the surge of interest, which has slowed everything down.
I’m in the Discord for Loops, but not affiliated with it. The dev said they’re rate-limited by their email provider, so it does take a long time to go through the queue. The queue is also split between Pixelfed and Loops, since they have the same developer, so that slows things down even more.
It took about three days to get my invite as well, but it may be a bit faster now since I think the initial surge of signups has tapered off a bit.
$3k-$5k is what I was expecting; I did price things out when I moved in two years ago and the estimate I got then was around $3k. I suspect the firm I got the quote from pushes higher prices for their financing options, since those were listed front and center on the price sheet they gave me.
My family has been helping organize my basement for the last week and a half. The new racking I ordered for the tubs should be arrive in a couple days, and at this point I’m starting to think about paint colors for the walls.
I’ve also had three electricians out this week to give me quotes on replacing the breaker box and upgrading my electrical service to 200 amps; I got the first quote yesterday and it was $6,700 (including running a circuit 20 feet and adding a couple outlets in a half-finished storage room), which seems pretty steep. Hopefully the others aren’t as high.
Sorry, I meant theoretically as in “at some distant point in the future where we’ve figured out how to make it work.” I probably read too much science fiction.
Unfortunately it’s a hard limit due to the speed of light. Theoretically you could use quantum entanglement to get around it, but then of course you wouldn’t need the satellites anymore.
Honestly I don’t have anything specific I’d recommend. When I was looking into it, I just did a ton of reading on forums along with articles about how to get everything set up. I also looked at the prices I was offered compared to the prices I’d be able to pay elsewhere, and got quotes from several different companies.
In the end there were a bunch of reasons I didn’t go with solar. I really love it as an idea, and I really want to do it, but it’s enormously expensive. There are lease options, but they’re also expensive and many of them seemed predatory. My utility ended their purchasing program for solar-generated power, and I’m still required to pay a large monthly fee to be connected to the grid, so I couldn’t plan to offset my costs there either. The tax credits are helpful, but you still need to pay up front.
Unfortunately the amount of delta-V you’d need to boost it to a parking orbit of some kind, or to the moon, would be deeply impractical. And it doesn’t have the shielding required to support any sort of deep space habitation.
I’d love to see some or all of it returned to be displayed in a museum, but it would probably be more expensive to do that than it was to build it in the first place. The vehicles to return it in whole or in pieces simply don’t exist right now, and on-orbit disassembly would be incredibly difficult and dangerous for astronauts to carry out.
I regret not catching that myself, that’s good 😁
My brother’s lab (not at MIT) has been 3D printing optically clear glass for years. They can do all sorts of shapes and figures, though I’m particularly fond of the Yoda heads. If I’m reading this article correctly, the breakthrough they made was with the temperatures they can do it at, and it’s much less to do with the novelty of 3D printing glass. So it’s much less “hey, this is amazing, nobody has ever done this before,” and far more “we did this cool thing in a new and harder way!”
I wasn’t blaming you. You were just one of today’s lucky 10,000, which is awesome!
While you are technically correct, gigabit almost universally refers to speeds, and not size. You can probably blame the ISPs for that, since they love to advertise “gigabit service” and drop the bit about “per second.”
I think you’re misreading that as “10 GB of data,” when it’s actually download speeds of 10Gb/s. I looked it up, and there doesn’t seem to be a data cap.
So it’s quite a bit cheaper than Starlink.
The flight manifests were also released, with passenger info and other flight data confirming the status of some people who had been disappeared. The hacker said they were able to access GlobalX’s AWS buckets to grab and delete data, and they also sent messages to the flight crews directly.
https://www.404media.co/globalx-airline-for-trumps-deportations-hacked/
Thank you very much! I’m going to give this a shot!
How do you make corn tortillas? Do you have a specific recipe you can recommend?
Waymo can absolutely drive at night, I’ve seen them do it. They rely heavily on LIDAR, so the time of day makes no difference to them.
And apparently they only disengage and need human assistance every 17,000 miles, on average. Contrast that to something like Tesla’s “Full Self Driving” (ignoring the controversy over whether it counts or not), where the most generous numbers I could find for it are a disengagement every 71 city miles, on average, or every 245 city miles for a “critical disengagement.”
You are correct in that Waymo is heavily geofenced, and that’s pretty annoying sometimes. I tried to ride one in Phoenix last year, but couldn’t get it to pick me up from the park I was visiting because I was just on the edge of their area. I suspect they would likely do fine if they went outside of their zones, but they really want to make sure they’re going to be successful so they’re deliberately slow-rolling where the service is available.
They’re still working on it. All the dev is by a single guy, who also runs Pixelfed. He says he’ll be open-sourcing the code soon so more people can contribute and help get things going, but he wants to finish getting the web interface working first. And apparently he’s been spending a lot of time keeping everything online during the surge of interest, which has slowed everything down.
I’m in the Discord for Loops, but not affiliated with it. The dev said they’re rate-limited by their email provider, so it does take a long time to go through the queue. The queue is also split between Pixelfed and Loops, since they have the same developer, so that slows things down even more.
It took about three days to get my invite as well, but it may be a bit faster now since I think the initial surge of signups has tapered off a bit.
Any chance you’d be willing to share the STL? I have a 16 inch portable monitor as well and I kinda want to try this when my new printer arrives.
$3k-$5k is what I was expecting; I did price things out when I moved in two years ago and the estimate I got then was around $3k. I suspect the firm I got the quote from pushes higher prices for their financing options, since those were listed front and center on the price sheet they gave me.
My family has been helping organize my basement for the last week and a half. The new racking I ordered for the tubs should be arrive in a couple days, and at this point I’m starting to think about paint colors for the walls.
I’ve also had three electricians out this week to give me quotes on replacing the breaker box and upgrading my electrical service to 200 amps; I got the first quote yesterday and it was $6,700 (including running a circuit 20 feet and adding a couple outlets in a half-finished storage room), which seems pretty steep. Hopefully the others aren’t as high.
Turns out communism was just a red herring!
Sorry, I meant theoretically as in “at some distant point in the future where we’ve figured out how to make it work.” I probably read too much science fiction.
Unfortunately it’s a hard limit due to the speed of light. Theoretically you could use quantum entanglement to get around it, but then of course you wouldn’t need the satellites anymore.
Honestly I don’t have anything specific I’d recommend. When I was looking into it, I just did a ton of reading on forums along with articles about how to get everything set up. I also looked at the prices I was offered compared to the prices I’d be able to pay elsewhere, and got quotes from several different companies.
In the end there were a bunch of reasons I didn’t go with solar. I really love it as an idea, and I really want to do it, but it’s enormously expensive. There are lease options, but they’re also expensive and many of them seemed predatory. My utility ended their purchasing program for solar-generated power, and I’m still required to pay a large monthly fee to be connected to the grid, so I couldn’t plan to offset my costs there either. The tax credits are helpful, but you still need to pay up front.
There are a couple animated adaptations of some of the books, and the live-action adaptation of Hogfather is pretty good!
Unfortunately the amount of delta-V you’d need to boost it to a parking orbit of some kind, or to the moon, would be deeply impractical. And it doesn’t have the shielding required to support any sort of deep space habitation.
I’d love to see some or all of it returned to be displayed in a museum, but it would probably be more expensive to do that than it was to build it in the first place. The vehicles to return it in whole or in pieces simply don’t exist right now, and on-orbit disassembly would be incredibly difficult and dangerous for astronauts to carry out.