I think https://github.com/KMKfw/kmk_firmware might be what you are looking for: It exposes itself as flash drive in bootloader-mode and the files on there are just regular Python scripts. If you search for "KMK macro pad", you'll find a bunch of projects - most of them diy.
If you want to start from scratch, Jan Lunge created an awesome tool for setup and keymap adjustments (video https://www.youtube.com/watch?v=RtYJYFMWjNM, repo https://github.com/JanLunge/pog) - with the idea being that after setup you do not need the tool anymore to adjust the keymap.
You program/configure your keymap into the keyboard's firmware so it is independent of your operating system. If you use Mac, you put your Mac specific keys into the map where you want them. It's totally up to you - if you want every key to be "a" you can do that :)
As a dev I've been on both sides to be honest. Especially when there is pressure to finish the next task. I think it needs good planning to create enough time for these things.
In the end bad devs will still shut you up about things they are not interested in fixing...
Nice! I started using helix before vim and often I find the helix bindings more logical (like shift for the reverse action e.g. u for undo and U for redo). However often the vim bindings feel quicker (c-i-w vs m-i-w-c).
Will definitely give it a go!
The fulcrum comes to mind: It has a 5-way joystick (up, down, left, right and push) for the thumbs. You can always add tenting if you want (some alternatives)
You also can check some of the split kbdatabases if someone created something similar.
Thanks for the tip with the shop (shipping is reasonable and electronic components are well priced)!
Cannot help with Azurefilm filament as I haven't tried it yet.
Neat! I've been looking for an CoreXY for sub 1k. Also open source and fast - very exciting!
I'll wait for the reviews to see if it holds up to the promises.
Unfortunately as you found out QMK is not officially supported. But there is a port called SonixQMK which supports this board. This firmware also supports OpenRGB, so you can integrate the light even better in your setup.
I think https://github.com/KMKfw/kmk_firmware might be what you are looking for: It exposes itself as flash drive in bootloader-mode and the files on there are just regular Python scripts. If you search for "KMK macro pad", you'll find a bunch of projects - most of them diy. If you want to start from scratch, Jan Lunge created an awesome tool for setup and keymap adjustments (video https://www.youtube.com/watch?v=RtYJYFMWjNM, repo https://github.com/JanLunge/pog) - with the idea being that after setup you do not need the tool anymore to adjust the keymap.
ach schade(n)
You program/configure your keymap into the keyboard's firmware so it is independent of your operating system. If you use Mac, you put your Mac specific keys into the map where you want them. It's totally up to you - if you want every key to be "a" you can do that :)
As a dev I've been on both sides to be honest. Especially when there is pressure to finish the next task. I think it needs good planning to create enough time for these things.
In the end bad devs will still shut you up about things they are not interested in fixing...
Wow nice. I just tried it with mobile Firefox and it was quite performant. Impressive!
Nice! I started using helix before vim and often I find the helix bindings more logical (like shift for the reverse action e.g. u for undo and U for redo). However often the vim bindings feel quicker (c-i-w vs m-i-w-c). Will definitely give it a go!
The fulcrum comes to mind: It has a 5-way joystick (up, down, left, right and push) for the thumbs. You can always add tenting if you want (some alternatives)
You also can check some of the split kb databases if someone created something similar.
Thanks for the tip with the shop (shipping is reasonable and electronic components are well priced)! Cannot help with Azurefilm filament as I haven't tried it yet.
If you're shopping in the EU, I recommend Devil Design PLA - they're available through a couple of shops.
Thanks, my works' codebase feels old now.
I also cannot name him from the top of my head...interesting
Well...uhm
sub-40 gang 👊
They don't call me AbstractJokerAdapterFactoryProxy for nothin'
Neat! I've been looking for an CoreXY for sub 1k. Also open source and fast - very exciting! I'll wait for the reviews to see if it holds up to the promises.
Great resource! I also found this one very useful: https://www.youtube.com/watch?v=RTQjvYENR7w
Ah the famous scissors-package problem - Now we finally know which came first!
Unfortunately as you found out QMK is not officially supported. But there is a port called SonixQMK which supports this board. This firmware also supports OpenRGB, so you can integrate the light even better in your setup.
3DJake sells them from Fiberology and Formfutura. Search for "refill"
I didn't know gleam.io, but knew gleam. So it depends on your bubble I guess...