my first thought is it is to attempt to deceive people. By hiding the tip button, it gives the incorrect picture that they don't allow tipping, which is standard for companies that don't pay tipping wages. I expect they did it so their customer not only orders more, but also thinks that they are paying their drivers a living wage as they don't need to tip.
but, what if instead of lowering the amount of food production to match what you said, we just outlaw throwing still good food out, and instead enforce a donation style regulation where leftover food that is still safe to eat must be donated or given, not wasted.
Like I used to watch the dunkin employee at the store I used to work at throw away dozens of perfectly fine doughnuts daily, or the bagels that wern't used. It's so wasteful for something that could have easily just been set outside as a "free for the taking" and then anything that wasn't taken can then be tossed the next morning.
No establishment does it because they know it would likely lower their customers, cause they would just wait for closing. but at least then its not wasting it all.
Ignoring whether or not that would be considered against the intent of the law as well, I personally think cost, zoning and safety requirements are going to be killer on any type of plan like that and is likely why no districts that I know of have attempted it.
In the US this isn't legal. Signal jammers are outlawed period, you can't even use one in your own private residence. The FCC is super clear on it's legality. Any form of signal jamming period that can disrupt a communications signal such as a cellphone or wifi signal on US soil is a felony. They have even gone as far as fining companies who sold devices that could potentially have been used to signal jam over the restriction. In the US the only time you can use any device that has the capability to block signals is by a federal agency on a case by case basis
They actually havehad (its been replaced with a much shorter excerpt that only mentions classrooms in a passerby) a FAQ about signal jammers where they explicitly mention it's use in the school environment.
I am a principal or school teacher and would like to use a jammer to limit cell
phone calls and texting during school hours. May I do so?
No. It is a violation of federal law to operate a jamming device within the U.S. Cell phone
jammers do not distinguish between social or other cell phone conversations and an emergency call to a family member or a 9-1-1 emergency responder. In an emergency,
use of a cell jammer can pose a threat to both students and staff by preventing
communications with police or emergency services.
In other words, jammers, even if carefully targeted, create risks of interference outside
their intended zone of operations and can thereby disrupt critical communications by
public safety providers, as well as the legitimate communications of passersby.
yea I found it weird as well. I assume they figure most people don't have the skills to just connect it again.
When I was looking into it, it's common practice for kitchen appliance warranties to have that as a requirement for warranty support when they are giving a replacement, likely they are trying to disincentivize someone getting a replacement for a minor issue, and then reselling one of the two appliances they have to make a profit, which I do understand for replacements but... in my case why not just send the replacement part... it likely could even go via an envelope and only pay the price of a stamp.
Theres no way paying to send a whole coffee maker is cheaper than sending a o-ring or a washer....
I stopped my yearly contribution last year when they felt the need to start guilt tripping their donors into trying to get them to donate more. It put a massive bad taste in my mouth.
I think you may have misread or misinterpreted the comment. Probably my fault for not making it clear, the "harmless" nature is removed when its plugged back in again, not during the repair. It's a different point of the repair process.
Even if it's unplugged first, I strongly disagree with the insinuation that since it's unplugged it's harmless. This is a device that uses the same amount of power draw as a stove top and has water contact as part of it's daily use. If someone who doesn't know what they're doing decides they want to access it, and does it incorrectly, it has the capability of burning your house down.
Having a standard screw on it like a Phillips or a regular screwdriver significantly lowers the barrier of entry in allowing someone who doesn't know what they're doing to work on the equipment, which is why I think it's fair that a component that has that capability has a something like a hex or a p bit. Those are both something that are not hard to obtain, but also something that you likely won't find just randomly laying around in your house unless you already regularly work on devices or equipment.
The "mobile device" one is outdated isn't it? They added a water proofing exemption to the battery initiative which exempts any product that may be exposed to water, which exempts mobile devices, smart watches and outdoor equipment from needing removable batteries.
I would classify a non-removable battery as the antithesis of repariability as they use single use glues to hold the covers on, and also usually glue components together as well.
Unless they are saying that even with glued components its still easily repairable? but I disagree
if its an electric kettle, I have to disagree. Those have the equivalent of a stovetop going through them when in use, and have a degree of water protection required. I heavily disagree with easy to access and remove screws on those. I still think they should be consumer repairable but, I think buying a set of P screwdrivers or whatever style they choose is a more than secure enough method of protecting people who don't realize what they are doing.
Being said, many things that do have tamper or non-standard screws I think shouldn't like the iphones, but I think appliances that have a burner element or a higher power draw should remain one of them.
I can go one further, if you ever want to do a warrenty claim with coffeemate, regardless of how small, they require you to cut the power cord.
I bought a cheap coffeemate coffee maker, and the anti-splash valve that prevents it from brewing fell off, and I lost the o-ring that was part of it as a result.
After 3 different contact points with coffee mate as their public listed email only warranty contact was incorrect and then was bounced to a couple more emails, they agreed it was a manufacturer problem, and that it was covered, but they wanted me to cut the power cord and show proof that the unit was no longer functional, because instead of sending me a 10¢ if that o ring, they wanted me to destroy a other than that one comp a perfectly functional unit, so they could send a whole new unit in it's place.
I bought a cheap oring set on amazon, so now I have more than I would ever need of orings but, at least it's less wasteful.
My position on this is really weird because I'm in support of laptops being in classrooms for educational uses. However, I'm against cell phones being in classroom.
That being said, as someone who grew up in a school system that didn't allow the parent to communicate with their child or a teenager, meaning that they couldn't call the school to have them relay a message, I am firmly against a straight ban period on school grounds. I was given a phone because my parents' work schedule was very fluid and could change within an hour or two. And on more than a handful of occasions, my mom would call the school and be like, hey, you need to relay the message to get on a different bus because there's no one going to be home, And they just wouldn't relay it. It also helped if I chose to go to a friends house after school
I'm also disliking how they skewed the results. If you read the actual study, you'll see that they merged the kind of agree strongly agree and the kind of disagree strongly disagree categories to make it a binary choice, but then chose to omit the six percent of the people who said they didn't care or had no strong opinion.
they also removed any results where the person chose the first option or the last option on every question. And I dislike any type of automated data sanitation method like that, because while they did randomize the first and fourth answer, every time, there's always the possibility that someone legitimately answered everything as either the first or last answer. My own vote could be stated that since I strongly agree that the cell phone shouldn't be in the classroom, but strongly disagree that it should be straight banned. So if question one and question two had the polarity of question one and question 2 flipped, where one was strongly agree and one was strongly disagree, it's entirely possible I would have been removed from the survey as a fraudulent result.
edit: removed couple sentences that drifted from topic some and fixed a repeated line
Not many things gave me goosebumps, but one song that did almost without fail for the first couple weeks that I'd binge listen to it, was gonna know we were here. I'm not normally a country fan, but for some reason that song in general would do it every time.
I eventually listened to it enough that I can't even bear hearing the song anymore, but for a while it was the only thing I'd listen to.
I want to follow that project. The only thing that I don't like is how heavily reliant the person who runs the github is on AI-gen
Normally, I don't really care about it because I know that it's something that is just a part of the industry now, but they're using it even on their responses to people on the issue requests, and it's to the point where it's hurting my head trying to read it due to how drawn out and detailed it ends up being.
It's really hard to follow along a project where something as simple as someone opening an issue about how it doesn't work with screen readers turns into a multi paragraph essay about the project and possibilities on how it works.
It's not shown in the actual article, but the first source that they provide for references says this.
Bernd Körber, Senior Vice President BMW Brand and Product Management, says: “The launch of the Neue Klasse and Spider-Man™: Brand New Day could not be more fitting. Both stand for a bold new beginning and the confidence to shape what comes next. We are proud to accompany this new Spider-Man™ chapter with the BMW iX3, our first model of the Neue Klasse.”```
So it seems like it's the Ix3 series. and maybe the 5 series because they indirectly mention it later on
Also thank you for making this post, it helped me realize I have a few containers and services I don't use and I don't think have activity on them anymore so I can start a deprecation cycle on them lol
Also thank you for making this post, it helped me realize I have a few containers and services I don't use and I don't think have activity on them anymore so I can start a deprecation cycle on them lol
my first thought is it is to attempt to deceive people. By hiding the tip button, it gives the incorrect picture that they don't allow tipping, which is standard for companies that don't pay tipping wages. I expect they did it so their customer not only orders more, but also thinks that they are paying their drivers a living wage as they don't need to tip.
but, what if instead of lowering the amount of food production to match what you said, we just outlaw throwing still good food out, and instead enforce a donation style regulation where leftover food that is still safe to eat must be donated or given, not wasted.
Like I used to watch the dunkin employee at the store I used to work at throw away dozens of perfectly fine doughnuts daily, or the bagels that wern't used. It's so wasteful for something that could have easily just been set outside as a "free for the taking" and then anything that wasn't taken can then be tossed the next morning.
No establishment does it because they know it would likely lower their customers, cause they would just wait for closing. but at least then its not wasting it all.
Ignoring whether or not that would be considered against the intent of the law as well, I personally think cost, zoning and safety requirements are going to be killer on any type of plan like that and is likely why no districts that I know of have attempted it.
In the US this isn't legal. Signal jammers are outlawed period, you can't even use one in your own private residence. The FCC is super clear on it's legality. Any form of signal jamming period that can disrupt a communications signal such as a cellphone or wifi signal on US soil is a felony. They have even gone as far as fining companies who sold devices that could potentially have been used to signal jam over the restriction. In the US the only time you can use any device that has the capability to block signals is by a federal agency on a case by case basis
They actually
havehad (its been replaced with a much shorter excerpt that only mentions classrooms in a passerby) a FAQ about signal jammers where they explicitly mention it's use in the school environment.yea I found it weird as well. I assume they figure most people don't have the skills to just connect it again.
When I was looking into it, it's common practice for kitchen appliance warranties to have that as a requirement for warranty support when they are giving a replacement, likely they are trying to disincentivize someone getting a replacement for a minor issue, and then reselling one of the two appliances they have to make a profit, which I do understand for replacements but... in my case why not just send the replacement part... it likely could even go via an envelope and only pay the price of a stamp.
Theres no way paying to send a whole coffee maker is cheaper than sending a o-ring or a washer....
I stopped my yearly contribution last year when they felt the need to start guilt tripping their donors into trying to get them to donate more. It put a massive bad taste in my mouth.
I think you may have misread or misinterpreted the comment. Probably my fault for not making it clear, the "harmless" nature is removed when its plugged back in again, not during the repair. It's a different point of the repair process.
Even if it's unplugged first, I strongly disagree with the insinuation that since it's unplugged it's harmless. This is a device that uses the same amount of power draw as a stove top and has water contact as part of it's daily use. If someone who doesn't know what they're doing decides they want to access it, and does it incorrectly, it has the capability of burning your house down.
Having a standard screw on it like a Phillips or a regular screwdriver significantly lowers the barrier of entry in allowing someone who doesn't know what they're doing to work on the equipment, which is why I think it's fair that a component that has that capability has a something like a hex or a p bit. Those are both something that are not hard to obtain, but also something that you likely won't find just randomly laying around in your house unless you already regularly work on devices or equipment.
The "mobile device" one is outdated isn't it? They added a water proofing exemption to the battery initiative which exempts any product that may be exposed to water, which exempts mobile devices, smart watches and outdoor equipment from needing removable batteries.
I would classify a non-removable battery as the antithesis of repariability as they use single use glues to hold the covers on, and also usually glue components together as well.
Unless they are saying that even with glued components its still easily repairable? but I disagree
if its an electric kettle, I have to disagree. Those have the equivalent of a stovetop going through them when in use, and have a degree of water protection required. I heavily disagree with easy to access and remove screws on those. I still think they should be consumer repairable but, I think buying a set of P screwdrivers or whatever style they choose is a more than secure enough method of protecting people who don't realize what they are doing.
Being said, many things that do have tamper or non-standard screws I think shouldn't like the iphones, but I think appliances that have a burner element or a higher power draw should remain one of them.
I can go one further, if you ever want to do a warrenty claim with coffeemate, regardless of how small, they require you to cut the power cord.
I bought a cheap coffeemate coffee maker, and the anti-splash valve that prevents it from brewing fell off, and I lost the o-ring that was part of it as a result.
After 3 different contact points with coffee mate as their public listed email only warranty contact was incorrect and then was bounced to a couple more emails, they agreed it was a manufacturer problem, and that it was covered, but they wanted me to cut the power cord and show proof that the unit was no longer functional, because instead of sending me a 10¢ if that o ring, they wanted me to destroy a other than that one comp a perfectly functional unit, so they could send a whole new unit in it's place.
I bought a cheap oring set on amazon, so now I have more than I would ever need of orings but, at least it's less wasteful.
My position on this is really weird because I'm in support of laptops being in classrooms for educational uses. However, I'm against cell phones being in classroom.
That being said, as someone who grew up in a school system that didn't allow the parent to communicate with their child or a teenager, meaning that they couldn't call the school to have them relay a message, I am firmly against a straight ban period on school grounds. I was given a phone because my parents' work schedule was very fluid and could change within an hour or two. And on more than a handful of occasions, my mom would call the school and be like, hey, you need to relay the message to get on a different bus because there's no one going to be home, And they just wouldn't relay it. It also helped if I chose to go to a friends house after school
I'm also disliking how they skewed the results. If you read the actual study, you'll see that they merged the kind of agree strongly agree and the kind of disagree strongly disagree categories to make it a binary choice, but then chose to omit the six percent of the people who said they didn't care or had no strong opinion.
they also removed any results where the person chose the first option or the last option on every question. And I dislike any type of automated data sanitation method like that, because while they did randomize the first and fourth answer, every time, there's always the possibility that someone legitimately answered everything as either the first or last answer. My own vote could be stated that since I strongly agree that the cell phone shouldn't be in the classroom, but strongly disagree that it should be straight banned. So if question one and question two had the polarity of question one and question 2 flipped, where one was strongly agree and one was strongly disagree, it's entirely possible I would have been removed from the survey as a fraudulent result.
edit: removed couple sentences that drifted from topic some and fixed a repeated line
I have 3 repos in it but I don't really care, it was all repos I had publically shared and open anyway
Not many things gave me goosebumps, but one song that did almost without fail for the first couple weeks that I'd binge listen to it, was gonna know we were here. I'm not normally a country fan, but for some reason that song in general would do it every time.
I eventually listened to it enough that I can't even bear hearing the song anymore, but for a while it was the only thing I'd listen to.
I want to follow that project. The only thing that I don't like is how heavily reliant the person who runs the github is on AI-gen
Normally, I don't really care about it because I know that it's something that is just a part of the industry now, but they're using it even on their responses to people on the issue requests, and it's to the point where it's hurting my head trying to read it due to how drawn out and detailed it ends up being.
It's really hard to follow along a project where something as simple as someone opening an issue about how it doesn't work with screen readers turns into a multi paragraph essay about the project and possibilities on how it works.
It's not shown in the actual article, but the first source that they provide for references says this.
So it seems like it's the Ix3 series. and maybe the 5 series because they indirectly mention it later on
This is on par with the cubes that you used to be able to pop the individual squares out and connect them in whatever order you want.
Why have I never thought of this. I even have a dead washer in my basement I was unsure what to do with.
I might be re-provisioning it's drum.
I use proxmox on one server, but currently my layout is:
LXCS:
VMs:
Also thank you for making this post, it helped me realize I have a few containers and services I don't use and I don't think have activity on them anymore so I can start a deprecation cycle on them lol
I use proxmox on one server, but currently my layout is:
LXCS:
Also thank you for making this post, it helped me realize I have a few containers and services I don't use and I don't think have activity on them anymore so I can start a deprecation cycle on them lol