I do! One of my friends added me to his plan last year to watch football, and the only benefit I can see is the higher bitrates offered. The plain 1080p option without a plan looks like ass.
Not defending the cost of youtube premium (I don't even buy it, myself). It's just a little extra thing I've noticed after the use of ublock.
However, I think I have seen a Firefox extension to help with bitrates, recently...
What sort of scale are we looking at here? To me, the raised perimeter and hole in the center looked like an old chevy tie rod end, but it would have to be in a severe state of decay.
How old is the PLA you're using? Is it possible it's absorbed too much moisture?
Are you printing too fast or possibly under-extruding?
Skip the glue. I've found it's just gunk that separates the filament from the print bed, worsening adhesion in my testing. Clean your print bed with rubbing alcohol before hand.
How old is your nozzle? If you've been printing for a few hundreds of hours, the inner diameter of the nozzle might be worn out.
How hot is your print bed? For PLA, I'll usually keep mine around 60°C.
I don't have a Bambu, but these are a few of the things I've learned with my Monoprice Maker Select v2 and Ankermake M5.
I recently softmodded my ps2 for about $30 (freemcboot memory card and large usb drive) and I've got hundreds of hours of nostalgia driven gameplay ahead of me. It's incredible to think that I have about 40 old, amazing games for less than half the price of a single new AAA game.
Why? Rail is already present most places and more efficient. Australia has road trains like this, but they're used to get to remote places in the outback where there isn't rail.
I had a 10th gen civic and loved it. Had I had more money a handful of years ago, I would have done a few upgrades to it.
If you have the 1.5L turbo engine that came on everything but the base model, you could upgrade the turbo and get a tune. That should put a bit more zip into it.
If you have the base model 2.0L, installing a turbo and all of the supporting mods on an NA vehicle is more expensive, time consuming, and frustrating for a first-timer. However, you could install an E85 kit to squeeze a bit more power out of it. Pair it with a tune and I bet you could get a bit past the 200hp mark.
These could be cheaper options than getting a similar car in a sport trim. However, I understand that modifying your daily driver can seem risky as well. If you're mechanically inclined and feeling adventurous, I would encourage you to take a look at what upgrades can be done to your current car.
I haven't used FreeCAD before, but if it's anything like inventor or fusion360, you might be able to edit the individual part and either reload that one part into the assembly or start a new assembly. Do you still have the .ipt file or equivalent for that one piece?
The gist is that his pregnant girlfriend was having severe abdominal pains and Gus brushed it off and wouldn't take her to an ER. She miscarried and he got canceled. This happened back in like 2021.
I've used Inventor and Fusion360 for small personal projects since 2014. In an instance like this, I would just draw a quick 2d shape off of the front face in your picture and cut it. Sometimes it's just not worth the time to figure out. Are you modeling professionally?
You are an adult and your actions have consequences.
My man. You don't realize that the consequences of you two breaking up means you two are no longer committed. You may be in denial of it, but you two were single from that point moving forward. Neither of you owed each other anything romantically and you are now on your own separate paths. There's no taking her back. You've already expressed your incompatible life goals. It's time to move on and get back in the dating game. It's hard and this may not be your last heartbreak.
Reading this post almost felt like reading a story about losing a loved one. If you have the money and space, I would be the influence urging you to get another one and reconnect with that feeling.
I do! One of my friends added me to his plan last year to watch football, and the only benefit I can see is the higher bitrates offered. The plain 1080p option without a plan looks like ass.
Not defending the cost of youtube premium (I don't even buy it, myself). It's just a little extra thing I've noticed after the use of ublock.
However, I think I have seen a Firefox extension to help with bitrates, recently...
What sort of scale are we looking at here? To me, the raised perimeter and hole in the center looked like an old chevy tie rod end, but it would have to be in a severe state of decay.
A few things I might consider/think to try:
I don't have a Bambu, but these are a few of the things I've learned with my Monoprice Maker Select v2 and Ankermake M5.
I recently softmodded my ps2 for about $30 (freemcboot memory card and large usb drive) and I've got hundreds of hours of nostalgia driven gameplay ahead of me. It's incredible to think that I have about 40 old, amazing games for less than half the price of a single new AAA game.
Everyone forgetting about my boy, Ceres.
Why? Rail is already present most places and more efficient. Australia has road trains like this, but they're used to get to remote places in the outback where there isn't rail.
I had a 10th gen civic and loved it. Had I had more money a handful of years ago, I would have done a few upgrades to it.
If you have the 1.5L turbo engine that came on everything but the base model, you could upgrade the turbo and get a tune. That should put a bit more zip into it.
If you have the base model 2.0L, installing a turbo and all of the supporting mods on an NA vehicle is more expensive, time consuming, and frustrating for a first-timer. However, you could install an E85 kit to squeeze a bit more power out of it. Pair it with a tune and I bet you could get a bit past the 200hp mark.
These could be cheaper options than getting a similar car in a sport trim. However, I understand that modifying your daily driver can seem risky as well. If you're mechanically inclined and feeling adventurous, I would encourage you to take a look at what upgrades can be done to your current car.
I haven't used FreeCAD before, but if it's anything like inventor or fusion360, you might be able to edit the individual part and either reload that one part into the assembly or start a new assembly. Do you still have the .ipt file or equivalent for that one piece?
The gist is that his pregnant girlfriend was having severe abdominal pains and Gus brushed it off and wouldn't take her to an ER. She miscarried and he got canceled. This happened back in like 2021.
If someone could be so kind as to explain, what does this mean for a normie such as myself? Will this lead to cool mods I could install?
I've used Inventor and Fusion360 for small personal projects since 2014. In an instance like this, I would just draw a quick 2d shape off of the front face in your picture and cut it. Sometimes it's just not worth the time to figure out. Are you modeling professionally?
My man. You don't realize that the consequences of you two breaking up means you two are no longer committed. You may be in denial of it, but you two were single from that point moving forward. Neither of you owed each other anything romantically and you are now on your own separate paths. There's no taking her back. You've already expressed your incompatible life goals. It's time to move on and get back in the dating game. It's hard and this may not be your last heartbreak.
Revving the up bricks
A ball joint separator and an afternoon of work could have saved you $900
"I showed you my toe beans pls respond"
L-82. Edelbrock carb, Holley intake, and Hooker headers. The next thing I want to do is a true dual exhaust.
It's Inland PLA+. From what I was reading, this should be fine up to 70°C. We'll see, though.
Reading this post almost felt like reading a story about losing a loved one. If you have the money and space, I would be the influence urging you to get another one and reconnect with that feeling.