Not entirely sure what "cold pull" means. I unscrewed the nozzle while the machine was powered off and the hot end was room temperature. Blasted the living hell out of the nozzle with a small torch, scrubbed it inside and out with a brass bristle brush, ran one of the bristles through the end of the nozzle. With the nozzle and ptfe out, I heated the hot end to 60 C to loosen the remaining chunk of filament and pushed it out the bottom with the handle of a needle file. It came out in one solid piece. Shined a light through both hot end and nozzle individually and it looked clear.
This is the first print I've done after removing and thoroughly cleaning the nozzle, unclogging the hot end, and adjusting the extruder clamping force. Guess it could be that the bed needs leveling, I haven't checked it in a while.
Honestly starting to think this blue filament is cursed, something goes wrong every time I use it. (I do dry it thoroughly every time I take it out of storage)
I hear you. If I already had a list of the subscriptions I have, then yeah that would work. But I am a forgetful person, so I need (or I suppose, want) a tool that will get me to that starting point.
Also, get a sleep study for sleep apnea. "It is estimated to affect 10% to 30% of adults in the United States but in many cases goes undiagnosed". -National Sleep Foundation
I've got a thunderbolt chip on an AMD motherboard, which doesn't usually happen, and I'm running an LG 5k monitor through it. I use an IBM model M over native PS/2. I've got a Ryzen 7, but a GTX 1060 cuz it still works. It's running Ultramarine Linux, based on Fedora.
I think I checked the e-steps when I upgraded the extruder (been I while, I don't remember) but I can check again
I hadn't heard of tightening the nozzle while hot, but I'll definitely give that a try
Not entirely sure what "cold pull" means. I unscrewed the nozzle while the machine was powered off and the hot end was room temperature. Blasted the living hell out of the nozzle with a small torch, scrubbed it inside and out with a brass bristle brush, ran one of the bristles through the end of the nozzle. With the nozzle and ptfe out, I heated the hot end to 60 C to loosen the remaining chunk of filament and pushed it out the bottom with the handle of a needle file. It came out in one solid piece. Shined a light through both hot end and nozzle individually and it looked clear.
This is the first print I've done after removing and thoroughly cleaning the nozzle, unclogging the hot end, and adjusting the extruder clamping force. Guess it could be that the bed needs leveling, I haven't checked it in a while.
Honestly starting to think this blue filament is cursed, something goes wrong every time I use it. (I do dry it thoroughly every time I take it out of storage)
True true
Number three will get you through most all fences, walls, and locked doors. Become ungovernable.
I'm from Arkansas, US. I identify more with my small town than with my state or nation. I also identify as a southerner, but somewhat reluctantly.
In times like these, I repeat the mantra: "At least you're not in Mississippi."
Weightless by Marconi Union if you want something relaxing, and anything by Alon Mor for some more exciting, incredibly sound designed music.
That definitely looks promising. What's the workflow for getting the subscription data into the application?
I hear you. If I already had a list of the subscriptions I have, then yeah that would work. But I am a forgetful person, so I need (or I suppose, want) a tool that will get me to that starting point.
Podcasts! They're not all boring
Impressive. Very nice. Let's see the Duke of Savoy's lover.
Hiroshima by Ben Folds
Redhat package manager, used on distros like fedora, suse, rhel
This is rpm erasure
Also, get a sleep study for sleep apnea. "It is estimated to affect 10% to 30% of adults in the United States but in many cases goes undiagnosed". -National Sleep Foundation
!orphancrushing@lemmy.world
That's the one! Damned good on the eyes, too.
MaXX is a new one for me, what's that like to use?
I've got a thunderbolt chip on an AMD motherboard, which doesn't usually happen, and I'm running an LG 5k monitor through it. I use an IBM model M over native PS/2. I've got a Ryzen 7, but a GTX 1060 cuz it still works. It's running Ultramarine Linux, based on Fedora.