The code looks like it uploads and fails to make noise or light up the led strip. and the serial output is a garbled mess (I tried different baud rates with no success). I have also check my wiring with a multi meter and scoured any wiring schematics.
I do want to stimulating the temperature. Also interesting theory, it would be cool to put it to the test. But I need some way to simulate a thermistor.
Also, The testing rig I want to build could be a cool demonstration piece for how a thermostat works. I might donate it to some tech school when I'm done with it. Time will tell
The script is already written into a flake. Also I have been playing with a Kmscon for better font rendering and the ability to zoom in and out with Ctrl+ and ctrl- in the TTY
Here is the flake (its only setup to compile for x86 as of now) https://git.ascosilinux.com/batvin321/CLI-typewriter-app
Thanks for the response.
Yes I am using dialog as a TUI menu to launch wordgrinder and launch a web based file manager.
I have done the sneaker net approach to transferring files over usb, it's less steps to select a menu option walk to my laptop and download the file from my webbrowser.
I do agree that the screen is small. I have run the script on a corebooted chromebook. I should continue doing that.
BTW the script is rewritten in nix and packaged into an appimage because I'm a sucker for pain.
Sorry if I missed anything. It is a lot to respond to.
Thanks. Btw i found a DC auto transfer switch on amazon. https://a.co/d/a6pnd9B
I assume i wire the car power to the "DC power source" so when it disappears it switches to "battery power" aka solar power. And the load terminal is wired to the DC in port on my bluetti
Its running off a 5v usb brick.
I am trying to alluminate the way to the bathroom for my mom late at night so she won't trip or kick the household black cat. Also I ordered some PIR motion sensors to turn on the LED strip.
I have dusted off this project, after shelving it for a bit. I have decided to embed a m8 nuts into the TPU solar panel mount.
I want to see if i can embed a ASA printed nut into the tpu print. It should hold up to the elements ontop of my car.
I would buy this, https://a.co/d/9Zx6j4k i cant spare to buy it due to being a broke college student living in his parrents house, LOL.
What about using a 12v barrel jack with a 12v to 24v step up converter. If I remember properly, I think the ender3 v2 requires 24v to the main board. I might be wrong, it could be 12v.
The code looks like it uploads and fails to make noise or light up the led strip. and the serial output is a garbled mess (I tried different baud rates with no success). I have also check my wiring with a multi meter and scoured any wiring schematics.
I do want to stimulating the temperature. Also interesting theory, it would be cool to put it to the test. But I need some way to simulate a thermistor. Also, The testing rig I want to build could be a cool demonstration piece for how a thermostat works. I might donate it to some tech school when I'm done with it. Time will tell
It would be fun to torch a google device while laughing psychotically.
Yeah I want to simulate the temperature readings. No blow torches or extreme heat preferred.
Thats one tasty looking cake (I mean KAKE!!!!!).
It was a bad battery. I didn't realize how old it is (it had a date from 2021). I got it replaced at autozone. I got a lot of places to be tomorrow.
The script is already written into a flake. Also I have been playing with a Kmscon for better font rendering and the ability to zoom in and out with Ctrl+ and ctrl- in the TTY Here is the flake (its only setup to compile for x86 as of now) https://git.ascosilinux.com/batvin321/CLI-typewriter-app
Thanks for the response. Yes I am using dialog as a TUI menu to launch wordgrinder and launch a web based file manager. I have done the sneaker net approach to transferring files over usb, it's less steps to select a menu option walk to my laptop and download the file from my webbrowser. I do agree that the screen is small. I have run the script on a corebooted chromebook. I should continue doing that. BTW the script is rewritten in nix and packaged into an appimage because I'm a sucker for pain.
Sorry if I missed anything. It is a lot to respond to.
Dam, my old antenna was powered over the coax. That's probly what did it.
Cool, Thank you.
Thanks. Btw i found a DC auto transfer switch on amazon. https://a.co/d/a6pnd9B I assume i wire the car power to the "DC power source" so when it disappears it switches to "battery power" aka solar power. And the load terminal is wired to the DC in port on my bluetti
Good thing i asked the experts. Any i deas for a way to switch to solar power when i turn off the car? Like some form of diy relay switch
True.
Its running off a 5v usb brick. I am trying to alluminate the way to the bathroom for my mom late at night so she won't trip or kick the household black cat. Also I ordered some PIR motion sensors to turn on the LED strip.
Its a product Safety standard. Here is a Wikipedia page. https://en.m.wikipedia.org/wiki/UL_(safety_organization)
I have dusted off this project, after shelving it for a bit. I have decided to embed a m8 nuts into the TPU solar panel mount. I want to see if i can embed a ASA printed nut into the tpu print. It should hold up to the elements ontop of my car. I would buy this, https://a.co/d/9Zx6j4k i cant spare to buy it due to being a broke college student living in his parrents house, LOL.
i want to log my car's data over time.
Yeah the idea to 3d print solar panel mounts with printed threads is probly a bad idea.
USBC PD could work for my old monoprice select mini v1 https://youtu.be/VehfqrkoXJA
What about using a 12v barrel jack with a 12v to 24v step up converter. If I remember properly, I think the ender3 v2 requires 24v to the main board. I might be wrong, it could be 12v.