Well, in case anyone thinks of torturing yourself building doing, don’t use SD cards!
Set everything up but there was a little stuttering and no amount of offloading to ram eliminated it so now testing an NVME drive thru USB. Again, not ideal but I’m not in a rush to pay inflated PI prices so while I have a 2TB NVME hat, I don’t have a PI 5 so… make do where you can! lol
My plan was to get a 2-3TB but thought it’d be too much so tried shoehorning it before remembering I already had the drive! 🤦♂️
🤨
I run my own unifi setup so network stuff spread over a number of devices so don’t really have much of an issue. The zero’s only do audio streaming though on minimal os that can’t phone home or update and they seem ok so far but atm i’m still breaking stuff while i tweak stuff, lol
But when i leave them alone to play they seem to do fine. I mean they should all cache a few seconds of audio so drop outs aren’t an issue, the problem with most wifi is likely too many devices on 1 AP or poor reconnect coding which unifi seem pretty good with. 😎
I’m in the process of building a multi-room audio system atm.
Snapserver/snapclients for the streaming audio, 1 audio stream with mpd to be set as 24/7 music, 1 for podcasts, 1 for alerts.
Alerts interrupt both streams to play the alerts. PI 4 for the main audio stack, first speaker, 2nd PI zero w/pirate radio hat/2 5w speakers for the portable speaker that should run most of the day on battery.
PodFetch gets the podcasts, script creates a playlist each day to play the oldest podcasts first. Although kinda surprised PodFetch doesn’t seem to let me do this.
Once it all runs smoothly i’ll put PI Zero W’s/Speakers in the other room and then going to build a 7” esp32 display to allow selecting which speaker plays which stream. Maybe later do something where each stream plays a different genre.
It sounds a bit like they can just magically connect via telepathy to their home base if you phrase it like that.
Its not that difficult, scan for open wifi, if detected, connect, phone home to spy central.
The more sinister, each tv that successfully detects a connection to spy central broadcasts a 2nd wifi that the tv can scan for and connect similar to mesh networking.
There are tons of reasons to want a network connected monitor, the problem is no-one seems interested in producing one without the spyware. I’d love a 40”+ device that supported rtsp, etc but until enough people step up and boycott all this spy crap it’ll never be worth producing better devices. 😞
does the system wait for electricity to flow in before it flows out?
Basically, yes!
If you unplug the micro inverter, it’ll cut the power within milliseconds of it detecting no electric signal. AC alternates around 50hz in the UK which the inverter detects and starts generating. Once it losses the hz signal it stops.
In the UK, you can buy 2 ~400w for about 140, then £100 for the micro inverter. I have 4 295w panels mounted on a flat, raised frame on the side of a shed and they cut my bill from £150 down to around £70 last month. So yes, they can pay for themselves pretty quickly.
And once they’re paid for, it’s all free electric! And we’re now seeing batteries with plugin style so you can store the electric to run white goods, saving even more, etc.
Also, unless you get a solar tracker, “optimally aligned” isn’t really possible. The sun moves inclination every day depending on where you live. Here in summer you’d want a more horizontal position, in winter a more vertical position which is why solar fencing is actually becoming a thing because they generate more in winter.
It really amazes me that people don’t understand this when governments have done it time and time again but hey ho, hopefully I’m old enough that I might at least die before the worst hits because clearly people are to ignorant to do anything to stop it! 😳
And what do you do when its a requirement to buy food, submit tax returns, get healthcare?
This is the problem people don’t understand. We have the same issue now in the UK. People think a voluntary system is easy ro just ignore until everything you rely and need forces you to starve or submit.
And its not going to stop at just age verification, it’ll continue until all you get to enjoy is maybe a loaf of bread, and some pond water! 🤦♂️
I feel if they marketed AI better they’d get far more subscribers. Right now they seem to be focused on ripping off businesses which seems very short sighted.
I’ll offer all my marketing insights for just 10% of all new subscribers under my marketing campaign! 😎
And the worst part are people are too stupid to put an end to it!
Thats really the bit that pulls me at least down the most. No matter what “I” can do, (which due to health isn’t much) the majority will continue slogging away until death!
First they add negative comments, then follow up with a positive post to seem like they’re being Impartial!
It’d be interesting to see how often the negative comments are put before the positive comments though because i’d guess it’s a lot higher than the reverse!
I’m also in the PI 4 group. Its worth watching ebay, etc for people selling pi clusters. I picked up my 8 node 4GB pi cluster fairly cheap.
Also if you’re learning and find yourself struggling with yaml files, I found Claude helped a lot to get running. Create the file, dump it into Claude and let it re-output the file. Give it the error log helps if it gets stuck.
Also if you explain your cluster setup, I built mine with Talos Linux so setup VIP, etc and it’s pretty good at generating a working setup.
I’m not a huge fan of AI but I struggled with yaml formatting so it might suck for a lot of stuff but formatting stuff properly is great.. that and scanning logs for errors! 😎
I don't fully understand it but Big Clive explained it once while tearing one of them apart.
Erm… yeah, i’m not en electrical engineer but slapping capacitors on things still increases power use slightly because capacitors have losses themselves. So that doesn’t make any sense. I get the smoothing out voltage side but voltage and amps can change as much as they want but the watts is always constant. So I still don’t see anything they do can reduce the wattage.
Ugh, most of mine are usually “I’m 23 and I made 3m on tiktok in 12 months…”
If you really made 3m then wtf are you making no quality tiktok videos instead of enjoying life are ruining tiktok even more by cluttering it up with even more god awful videos?
Because you didn’t… and this is the critical thinking no-one bothers to taught themselves so get easily scammed.
Like the “Voltage harmonisers” that “cut you’re bill by ½”. Anyone with 1 braincell would understand electric is charged by watts because its the value that doesn’t change when voltage or amps change!
I normally only watch tiktok when waiting for something to finish but I’m almost at the point now where it’s more interesting to watch paint dry than try find anything fun on tiktok. 😞
If tiktok videos where honest they’d be saying “If don’t have any conscience or empathy, you too can get rich by ripping morons off and conning them into re-selling your garbage so you don’t have to.”
So what I’d suggest is sending me 10k and i’ll see if I take. However I’d also suggest we do multiple runs just to confirm consistency. I hear 100 times is a good number for checking consistencies.
I bought the Beelink SER9 MAX, mainly because it’s the only one I saw with 64GB Ram.
It came with windows, but binned that for debian running Ollama and openclaw pretty well. I looked at others but according to Claude, the A1 Pro that i looked at only really supports Windows and I emailed minisforum who confirmed it so kinda went off there PC’s.
I’m not aiming for speed though, i’m aiming for learning but the only issue i’ve run into a few times is:
⚠️ Something went wrong while processing your request. Please try again, or use /new to start a fresh session.
But running /compact seems to fix it. I’d love a few more beelink’s to run a cluster though.
Edit: Also I’m also messing with openclaw and openclaw can’t seem to spawn agents to do tasks. Not sure if thats hardware related or config issue. 🤷♂️
I don’t really have much to backup tbh, what I do have is backed up to another drive but unfortunately hosting that offsite because I don’t have friends, lol.
If you aren’t running it yourself, you’ll always be held hostage by toxic companies!
Time and time again, from account closures to account locking… if you value anything, you should really look at self hosting it. Yes it’s a learning curve, but now is actually a good time because you have claude to help, but don’t expect that to last!
I am and will only ever use the free tier of claude but even that is actually pretty useful. Just don’t reuse the same chat, create new ones, delete ones no longer needed and you rarely hit the usage limits.
I’ve used claude to get my own AI server running on a low power beelink PC and while i’m still learning, it runs pretty well so Imcan now bounce between my own AI, to claude for the few issues I can’t solve.
Well, in case anyone thinks of torturing yourself building doing, don’t use SD cards!
Set everything up but there was a little stuttering and no amount of offloading to ram eliminated it so now testing an NVME drive thru USB. Again, not ideal but I’m not in a rush to pay inflated PI prices so while I have a 2TB NVME hat, I don’t have a PI 5 so… make do where you can! lol
My plan was to get a 2-3TB but thought it’d be too much so tried shoehorning it before remembering I already had the drive! 🤦♂️ 🤨
I run my own unifi setup so network stuff spread over a number of devices so don’t really have much of an issue. The zero’s only do audio streaming though on minimal os that can’t phone home or update and they seem ok so far but atm i’m still breaking stuff while i tweak stuff, lol
But when i leave them alone to play they seem to do fine. I mean they should all cache a few seconds of audio so drop outs aren’t an issue, the problem with most wifi is likely too many devices on 1 AP or poor reconnect coding which unifi seem pretty good with. 😎
I’m in the process of building a multi-room audio system atm.
Snapserver/snapclients for the streaming audio, 1 audio stream with mpd to be set as 24/7 music, 1 for podcasts, 1 for alerts.
Alerts interrupt both streams to play the alerts. PI 4 for the main audio stack, first speaker, 2nd PI zero w/pirate radio hat/2 5w speakers for the portable speaker that should run most of the day on battery.
PodFetch gets the podcasts, script creates a playlist each day to play the oldest podcasts first. Although kinda surprised PodFetch doesn’t seem to let me do this.
Once it all runs smoothly i’ll put PI Zero W’s/Speakers in the other room and then going to build a 7” esp32 display to allow selecting which speaker plays which stream. Maybe later do something where each stream plays a different genre.
Its not that difficult, scan for open wifi, if detected, connect, phone home to spy central.
The more sinister, each tv that successfully detects a connection to spy central broadcasts a 2nd wifi that the tv can scan for and connect similar to mesh networking.
There are tons of reasons to want a network connected monitor, the problem is no-one seems interested in producing one without the spyware. I’d love a 40”+ device that supported rtsp, etc but until enough people step up and boycott all this spy crap it’ll never be worth producing better devices. 😞
Basically, yes!
If you unplug the micro inverter, it’ll cut the power within milliseconds of it detecting no electric signal. AC alternates around 50hz in the UK which the inverter detects and starts generating. Once it losses the hz signal it stops.
Depends if you do it right.
In the UK, you can buy 2 ~400w for about 140, then £100 for the micro inverter. I have 4 295w panels mounted on a flat, raised frame on the side of a shed and they cut my bill from £150 down to around £70 last month. So yes, they can pay for themselves pretty quickly.
And once they’re paid for, it’s all free electric! And we’re now seeing batteries with plugin style so you can store the electric to run white goods, saving even more, etc.
Also, unless you get a solar tracker, “optimally aligned” isn’t really possible. The sun moves inclination every day depending on where you live. Here in summer you’d want a more horizontal position, in winter a more vertical position which is why solar fencing is actually becoming a thing because they generate more in winter.
It really amazes me that people don’t understand this when governments have done it time and time again but hey ho, hopefully I’m old enough that I might at least die before the worst hits because clearly people are to ignorant to do anything to stop it! 😳
And what do you do when its a requirement to buy food, submit tax returns, get healthcare?
This is the problem people don’t understand. We have the same issue now in the UK. People think a voluntary system is easy ro just ignore until everything you rely and need forces you to starve or submit.
And its not going to stop at just age verification, it’ll continue until all you get to enjoy is maybe a loaf of bread, and some pond water! 🤦♂️
How do i get in on this?
I feel if they marketed AI better they’d get far more subscribers. Right now they seem to be focused on ripping off businesses which seems very short sighted.
I’ll offer all my marketing insights for just 10% of all new subscribers under my marketing campaign! 😎
And the worst part are people are too stupid to put an end to it!
Thats really the bit that pulls me at least down the most. No matter what “I” can do, (which due to health isn’t much) the majority will continue slogging away until death!
Its not hard to see what they’re doing…
First they add negative comments, then follow up with a positive post to seem like they’re being Impartial!
It’d be interesting to see how often the negative comments are put before the positive comments though because i’d guess it’s a lot higher than the reverse!
I’m also in the PI 4 group. Its worth watching ebay, etc for people selling pi clusters. I picked up my 8 node 4GB pi cluster fairly cheap.
Also if you’re learning and find yourself struggling with yaml files, I found Claude helped a lot to get running. Create the file, dump it into Claude and let it re-output the file. Give it the error log helps if it gets stuck.
Also if you explain your cluster setup, I built mine with Talos Linux so setup VIP, etc and it’s pretty good at generating a working setup.
I’m not a huge fan of AI but I struggled with yaml formatting so it might suck for a lot of stuff but formatting stuff properly is great.. that and scanning logs for errors! 😎
Erm… yeah, i’m not en electrical engineer but slapping capacitors on things still increases power use slightly because capacitors have losses themselves. So that doesn’t make any sense. I get the smoothing out voltage side but voltage and amps can change as much as they want but the watts is always constant. So I still don’t see anything they do can reduce the wattage.
But i’m an uneducated idiot so who knows!
I’m not smart and still see through the corporate bs! 🤨
Ugh, most of mine are usually “I’m 23 and I made 3m on tiktok in 12 months…”
If you really made 3m then wtf are you making no quality tiktok videos instead of enjoying life are ruining tiktok even more by cluttering it up with even more god awful videos?
Because you didn’t… and this is the critical thinking no-one bothers to taught themselves so get easily scammed.
Like the “Voltage harmonisers” that “cut you’re bill by ½”. Anyone with 1 braincell would understand electric is charged by watts because its the value that doesn’t change when voltage or amps change!
I normally only watch tiktok when waiting for something to finish but I’m almost at the point now where it’s more interesting to watch paint dry than try find anything fun on tiktok. 😞
If tiktok videos where honest they’d be saying “If don’t have any conscience or empathy, you too can get rich by ripping morons off and conning them into re-selling your garbage so you don’t have to.”
I’m not sure I can answer that yet.
So what I’d suggest is sending me 10k and i’ll see if I take. However I’d also suggest we do multiple runs just to confirm consistency. I hear 100 times is a good number for checking consistencies.
I think so much posted online isn’t real as such and more fabricated and what I classify as ‘engagement bait’
TikTok is full of it and seems to have got worse now AI slop machine can churn it out en-mass.
I bought the Beelink SER9 MAX, mainly because it’s the only one I saw with 64GB Ram.
It came with windows, but binned that for debian running Ollama and openclaw pretty well. I looked at others but according to Claude, the A1 Pro that i looked at only really supports Windows and I emailed minisforum who confirmed it so kinda went off there PC’s.
I’m not aiming for speed though, i’m aiming for learning but the only issue i’ve run into a few times is:
But running /compact seems to fix it. I’d love a few more beelink’s to run a cluster though.
Edit: Also I’m also messing with openclaw and openclaw can’t seem to spawn agents to do tasks. Not sure if thats hardware related or config issue. 🤷♂️
I don’t really have much to backup tbh, what I do have is backed up to another drive but unfortunately hosting that offsite because I don’t have friends, lol.
If you aren’t running it yourself, you’ll always be held hostage by toxic companies!
Time and time again, from account closures to account locking… if you value anything, you should really look at self hosting it. Yes it’s a learning curve, but now is actually a good time because you have claude to help, but don’t expect that to last!
I am and will only ever use the free tier of claude but even that is actually pretty useful. Just don’t reuse the same chat, create new ones, delete ones no longer needed and you rarely hit the usage limits.
I’ve used claude to get my own AI server running on a low power beelink PC and while i’m still learning, it runs pretty well so Imcan now bounce between my own AI, to claude for the few issues I can’t solve.