I've just bought and connected to it a JetKVM, when I saw an RJ11 port, I thought that it could have been used to "push" those buttons, but instead it's a serial port ☹️
Sorry, I've missed your reply.
No, I haven't integrated any of them into HA; what is your need for such integration?
I've only exposed a Node Red webook: Node Red receives coordinates from my car/smartphone/something else and distributes them to Traccar and Dawarich.
I did think about that option, but the onboard NIC is connected to the ONT (fiber connection) and the SFP+ is off when the server is off so it can't receive WOL packets.
By the way, thanks.
I'm gonna give you my setup even if it's not what you've asked.
I use Tasker to automatically start GPSlogger whenever Içm not connected to a known WiFi.
GPSlogger sends data to NodeRed (it could send the directly to Traccar) that sends it to Traccar and Dawarich (if you don't know it, try it!).
You could easily send the position to HA with "call service" or an HTTP request
The SSD nowadays have a very high write limit, unless you'll keep writing data on them constantly, you'll never worn out. You will have to write about 500 times the whole SSD to wear it out (some thousands for enterprise SSDs).
Oh, Proxmox backup server can be installed in a VM? I'll think about installing it in a VM on Hyper-V on an office server.
I already had plan to install Proxmox backup server on a spare PC that I've got laying around and turn it on nightly to backup all the Proxmox server.
Apart from that, I need to backup data too because in case of any crash, a VM backup is useful, but sometimes you just need to retrieve some file.
I've just bought and connected to it a JetKVM, when I saw an RJ11 port, I thought that it could have been used to "push" those buttons, but instead it's a serial port ☹️
Sorry, I've missed your reply. No, I haven't integrated any of them into HA; what is your need for such integration? I've only exposed a Node Red webook: Node Red receives coordinates from my car/smartphone/something else and distributes them to Traccar and Dawarich.
I think that I'll go this way, thanks. I don't have transistors, but I have a 2 relay Ethernet board.
It depends, usually just some minutes, but during the summer it could be more. I'd like (the ideal result) to find a way that just works in any case.
Totally agree. They could be the stars of their repository
Negative, it's "just" an HP Elitebook with a PCIe SFP+ board.
Only through SFP+ I think that the only option would be to add a second NiC. Thanks!
I did think about that option, but the onboard NIC is connected to the ONT (fiber connection) and the SFP+ is off when the server is off so it can't receive WOL packets. By the way, thanks.
I'm gonna give you my setup even if it's not what you've asked. I use Tasker to automatically start GPSlogger whenever Içm not connected to a known WiFi. GPSlogger sends data to NodeRed (it could send the directly to Traccar) that sends it to Traccar and Dawarich (if you don't know it, try it!). You could easily send the position to HA with "call service" or an HTTP request
The SSD nowadays have a very high write limit, unless you'll keep writing data on them constantly, you'll never worn out. You will have to write about 500 times the whole SSD to wear it out (some thousands for enterprise SSDs).
I've used about 10 years ago too, but I've heard that now it needs a Mikrotik device but I've nver had the time to test it
Can it discover non Mikrotik devices?
After your comment I went to ser this video and...I'm gonna install PBS tomorrow! Thanks!
Oh, Proxmox backup server can be installed in a VM? I'll think about installing it in a VM on Hyper-V on an office server. I already had plan to install Proxmox backup server on a spare PC that I've got laying around and turn it on nightly to backup all the Proxmox server. Apart from that, I need to backup data too because in case of any crash, a VM backup is useful, but sometimes you just need to retrieve some file.
How would you create the remote repository? With rest-server?
Got it, good idea, thanks!
I'm sorry, but I still don't understand what you mean. Could you please elaborate bit? Thanks!
Why Tailscale AND Headscale? Arent't they the same thing?
Definitely a good suggestion!
I'm using a M720q with an Intel i5-8400T for the same purpose and I'm happy with it.