@EchoCranium Exactly same thing happened to me when I tried to use AnyCubic slicer, that did not had Linux build, but only Windows binary installer. AnyCubic slicer is fork of Orca.
Are you sure you are using Linux version of the slicer?
@Vikthor Myslim si (názor laika), že ano. Ale opravovaly ve smyslu "ne, tohle neni vražda, ale ublížení na zdraví" a ne, že jeden soud dá nevinu anebo podmínku a druhej tě zavře na 30 let
@Vikthor Na tom je krásně vidět, jak soudnictví u nás prostě nefunguje - nejen, že se s tím mažou strašně dlouho, ale ještě si jednotlivý instance diametrálně odporujou, což je ujetý. Předpokládal bych, že aspoň rámcově bude právo názorově konzistentní.
No a v tu chvíli se pak nabídne otázka, zda není v něčím zájmu, aby nebylo...
@Brownie Od všeho trochu, ale vždy spíš liberál
@Brownie Označit mě může kdo chce jak chce a určitě to neznamená, že to ze mě udělá anarchistu nebo socialistu :)
@Brownie Musim bejt levičák a anarchista proto, abych neměl rád fašouny?
@Tehdastehdas Front heavy when going uphill? I seriously am not sure about it, but never driven one.
@mariusor @plactagonic My bet is on too much weight on rear wheel
@Vasek79 #Babiš? To je ten, co nepomůže Polsku v případě napadení a nemůže prohlásit, že #Grónsko je součástí Dánska?
@PostnataleAbtreibung
If you stick with bambu ams diameter, you should be just OK
Ad USB printing - yes, it works without any issues
@PostnataleAbtreibung I have #Anycubic S1 combo at home and when it prints, it prints cool.
However, I have constant issues with network connection on it (the firmware is shit). ACE also does not fit some 1kg spools, be aware of it.
If you have questions, feel free to ask.
I mostly print #PETG, sometimes #ASA
@Interstellar_1 Backpack carrier clips for #bicycle .. something similar to this: thingiverse.com/thing:4922090
Did a little mod to make them fit to D-clips on my backpack and effectively converted it into pannier backpack 😀
@EchoCranium Native Orca from flatpak just works for me
@EchoCranium Exactly same thing happened to me when I tried to use AnyCubic slicer, that did not had Linux build, but only Windows binary installer. AnyCubic slicer is fork of Orca.
Are you sure you are using Linux version of the slicer?
@kde Amazing .. most missed feature for me as going to settings was annoying as hell
@gdaofb27584 The base need few supports, it's not stable enough
@gdaofb27584 According to object rotation I don't think it's printing issue, but nozzle hit the model and rotated it
@PugJesus
WTF? 😁
@PugJesus
WTF? 😁
@Vikthor Myslim si (názor laika), že ano. Ale opravovaly ve smyslu "ne, tohle neni vražda, ale ublížení na zdraví" a ne, že jeden soud dá nevinu anebo podmínku a druhej tě zavře na 30 let
@Vikthor Na tom je krásně vidět, jak soudnictví u nás prostě nefunguje - nejen, že se s tím mažou strašně dlouho, ale ještě si jednotlivý instance diametrálně odporujou, což je ujetý. Předpokládal bych, že aspoň rámcově bude právo názorově konzistentní.
No a v tu chvíli se pak nabídne otázka, zda není v něčím zájmu, aby nebylo...
@ExtremeDullard Wouldn't be better solution to print letters first?
@PostaL
I'm not saying it's not - actually both manufacturers and customers may benefit this way