I get that they are poor quality and soft metal, but recycling them in my area is not possible, and my brain stops me from putting it in a landfill. So junk drawer it goes!
A few years back I threw my stash into the metal recycling, leaving me one or two of each side. Immediately after that I needed one that I knew I had the size for, but couldn't find it anymore.
The free ones they give you are made from the cheapest metal and to poor tolerances. They're literally the bare minimum to put together whatever they came from. They'll potentially slip and round off if used heavily. Good quality ones are made from carbon steel and will hold their shape.
21 Comments
NightFantom@slrpnk.net · 16 pts · 22d
After all, why shouldn't I keep it?
ToiletFlushShowerScream@piefed.world · 9 pts · 22d
I get that they are poor quality and soft metal, but recycling them in my area is not possible, and my brain stops me from putting it in a landfill. So junk drawer it goes!
rants_unnecessarily@piefed.social · 5 pts · 22d
How is metal recycling not possible?
gaiussabinus@lemmy.world · 9 pts · 22d
I work in the trades. If you throw out the roof hatch Allen key, I will fight you.
NeatNit@discuss.tchncs.de · 7 pts · 22d
You think I know which allen key in my allen key bucket is the roof hatch one?
homesweethomeMrL@lemmy.world · 3 pts · 22d
Well, it's one of 'em, innit.
tetris11@feddit.uk · 3 pts · 22d
isn't it the one named Alan?
Zorque@lemmy.world · 4 pts · 22d
I thought it was Steve...
Steve! Steve!
rants_unnecessarily@piefed.social · 8 pts · 22d
A few years back I threw my stash into the metal recycling, leaving me one or two of each side. Immediately after that I needed one that I knew I had the size for, but couldn't find it anymore.
Never throwing them away again.
Screamium@lemmy.world · 6 pts · 21d
Tape it to the bottom of whatever furniture or whatever you just put together!
123@programming.dev · 1 pts · 20d
homesweethomeMrL@lemmy.world · 5 pts · 22d
I feel personally attacked
relative_iterator@sh.itjust.works · 4 pts · 22d
Saved these for years but finally started throwing them away. Such a relief lol
negativenull@piefed.world · 6 pts · 22d
I bought a set of Standard/Metric ones that are like 6 inches long. That extra length makes such a difference. I threw my stockpile away after that.
N0t_5ure@lemmy.world · 5 pts · 22d
The free ones they give you are made from the cheapest metal and to poor tolerances. They're literally the bare minimum to put together whatever they came from. They'll potentially slip and round off if used heavily. Good quality ones are made from carbon steel and will hold their shape.
goondaba@lemmy.world · 5 pts · 22d
That was my plan; got a set and figured I’d throw out the pile eventually.
But when I tried using only my set keys, it turned out some of my gear has specialty sizes I can’t open/tighten with my set keys.
So now I’m MORE paranoid about hoarding all the Allen keys.
binarytobis@lemmy.world · 2 pts · 22d
Did you get both an imperial and metric set? I see a lot of each.
goondaba@lemmy.world · 1 pts · 21d
Yep; got an SAE/Metric set, but apparently I have some gear that uses really tiny or comically large key sizes.
illi@sh.itjust.works · 2 pts · 22d
In that case you will need one within a month.
lightnsfw@reddthat.com · 3 pts · 22d
Just buy a set, even cheap ones will be better than the crap coming with your furniture.
P1k1e@lemmy.world · 2 pts · 22d
Thank you random meme on the internet. I have now cast them into the fire