Bambu lab a while ago came out with printers and an ecosystem that was very easy to use compared to other printers for the price. However, there were a few red flags like proprietary parts, software which required the cloud, and DRM chips in filament. Bambu lab promised they weren't gonna exploit any of that and that they will keep their printers and ecosystem open and all the red flags were just used to aid in user experience like automatic print settings for DRM chipped filament, easy to swap parts, and cloud monitoring and notifications. Despite the promise, they're still a corporation and thus went against their word and closed off 3rd party slicers and firmwares so you must use their cloud and their software.
You do not own the printers, Bambu does. So now you cannot install third party firmware on your Bambu 3d printer or use a different slicer. Everything you do on your Bambu printer goes through their cloud unless you take countermeasures and use old versions of software and firmware before the lockdown happened and you completely block internet access to the printers.
People saw these big red flags early on and called them out on it saying they're gonna lock down their ecosystem later on but people kept buying into Bambulab since they were so easy to use and got amazing prints out of them.
Tl;Dr, Bambulab released printers and software that were so easy to use for the price but came with many red flags. Bambulab ended up closing down their entire ecosystem so they have full control of the printers and you are at their mercy if you wanna keep using it.
Pretty much the teacher caught the students throwing toilet paper over their tree but slipped and fell on the wet ground. The students, instead of helping the teacher, fled in cars and one of them ran over the teacher, killing them (The students did stop to give help and called emergency services).
The student that killed the teacher was charged with homicide but the teacher's family wants the charges dropped stating that the teacher spent their lives teaching these children and don't want to ruin their lives with severe criminal charges.
It looks like the teacher knew and liked the students and knew about the prank and was planning how to surprise them. They were a really cool teacher by the sounds of it and the school misses them.
If space isn't the biggest factor, you can get the micro-pc and connect a microcontroller like a raspberry pi pico via USB or serial and write a driver to interface between the two systems (or use something like micro-ros). It's not the best in extremely space constrained situations or areas where the connectors could come apart though
Just a heads up, the whole "you don't have to aim" is a complete myth. Shotgun spread is completely blown out of proportion. It's somewhere around 0.5" to 1" per yard with barrel length, choke, and shot type affecting spread. Unless you're insanely rich and live in a mansion, you'd be within 10 yards so you'd only get 5" to 10" of spread which really isn't much especially since the pellets may not be evenly distributed within that diameter.
For anyone looking to buy a gun, educate yourself first to know what you're getting into and go to the range consistently so you know how to use it. If you don't do both of those, you'd be at risk of hurting yourself or someone else if ever you have to use it in a life or death situation.
If you have Skyrim and want a new story, download Enderal. It's pretty much an entirely new game built on Skyrim's engine. It's pretty great and free if you already have a copy of Skyrim
Bambu lab a while ago came out with printers and an ecosystem that was very easy to use compared to other printers for the price. However, there were a few red flags like proprietary parts, software which required the cloud, and DRM chips in filament. Bambu lab promised they weren't gonna exploit any of that and that they will keep their printers and ecosystem open and all the red flags were just used to aid in user experience like automatic print settings for DRM chipped filament, easy to swap parts, and cloud monitoring and notifications. Despite the promise, they're still a corporation and thus went against their word and closed off 3rd party slicers and firmwares so you must use their cloud and their software.
You do not own the printers, Bambu does. So now you cannot install third party firmware on your Bambu 3d printer or use a different slicer. Everything you do on your Bambu printer goes through their cloud unless you take countermeasures and use old versions of software and firmware before the lockdown happened and you completely block internet access to the printers.
People saw these big red flags early on and called them out on it saying they're gonna lock down their ecosystem later on but people kept buying into Bambulab since they were so easy to use and got amazing prints out of them.
Tl;Dr, Bambulab released printers and software that were so easy to use for the price but came with many red flags. Bambulab ended up closing down their entire ecosystem so they have full control of the printers and you are at their mercy if you wanna keep using it.
Nintendoes if you're brave enough
They might care if it's 69420 since the max port number is 2^16 = 65536
I
Pretty much the teacher caught the students throwing toilet paper over their tree but slipped and fell on the wet ground. The students, instead of helping the teacher, fled in cars and one of them ran over the teacher, killing them (The students did stop to give help and called emergency services).
The student that killed the teacher was charged with homicide but the teacher's family wants the charges dropped stating that the teacher spent their lives teaching these children and don't want to ruin their lives with severe criminal charges.
It looks like the teacher knew and liked the students and knew about the prank and was planning how to surprise them. They were a really cool teacher by the sounds of it and the school misses them.
If space isn't the biggest factor, you can get the micro-pc and connect a microcontroller like a raspberry pi pico via USB or serial and write a driver to interface between the two systems (or use something like micro-ros). It's not the best in extremely space constrained situations or areas where the connectors could come apart though
LongbOwOman
:5
MSFT? Microsoft?
Using those measurements, that's about 38.4MB of storage on that tape
Just a heads up, the whole "you don't have to aim" is a complete myth. Shotgun spread is completely blown out of proportion. It's somewhere around 0.5" to 1" per yard with barrel length, choke, and shot type affecting spread. Unless you're insanely rich and live in a mansion, you'd be within 10 yards so you'd only get 5" to 10" of spread which really isn't much especially since the pellets may not be evenly distributed within that diameter.
For anyone looking to buy a gun, educate yourself first to know what you're getting into and go to the range consistently so you know how to use it. If you don't do both of those, you'd be at risk of hurting yourself or someone else if ever you have to use it in a life or death situation.
So much hate for just using a few different characters
If you have Skyrim and want a new story, download Enderal. It's pretty much an entirely new game built on Skyrim's engine. It's pretty great and free if you already have a copy of Skyrim
Clair Obscur: Expedition 33
An absolute emotional rollercoaster start to end.
33/33 would recommend
Game: Press this button to trigger this game mechanic
Me: Starts ugly crying
It's either be killed instantly in the spot or die in a foreign concentration camp
LaurieWired has good content. She does lots of computer science/history related content which is really interesting
Goodbye