c/selfhosted · by derjules@lemmy.world · 11d

List for 10” equipment for homelab

As my kids want their own rooms in the future I’ll need to downsize a bit. Is there a list for recommended 10” Equipment? Any help appreciated. My research so far turned always in the direction of get rack bars and a 3D printer ( or shops selling the 3d prints)

30 points · 19 comments · view on lemmy.world

19 Comments

possiblylinux127@lemmy.zip · 31 pts · 11d (1 reply)

Have you considered putting your kids up for adoption?

AbidanYre@lemmy.world · 23 pts · 11d

What a horrible thing to suggest.

Sell them and use the money for more equipment.

elDalvini@discuss.tchncs.de · 19 pts · 11d (3 replies)

Jeff Geerling put together a list of a lot of 10" Hardware: Project MINI RACK

GraveyardOrbit@lemmy.zip · 1 pts · 11d (2 replies)

[ removed ]

elDalvini@discuss.tchncs.de · 2 pts · 11d

That's new information for me, and a quick web search doesn't bring up anything to that end (other than him being Christian, and I don't find that problematic on its own). What did I miss?

Edit: Nevermind, I just found his blog. I mean, everything related to politics and religion is from more than 10 years ago, but... yikes. That's a shame, I really like his videos.

weilii@lemmy.lacasabien.space · 2 pts · 10d

Well I never particularly cared for his videos before, but I'm gonna make damn sure I never click on another one after doing some reading on this. Thanks for sharing

poVoq@slrpnk.net · 12 pts · 11d (1 reply)

I believe raised beds for kids have a lot of space beneath them for putting servers. Just make sure they can't pull the plugs 😜

drhoopoe@lemmy.sdf.org · 4 pts · 11d

Keeps 'em nice and warm too.

yaroto98@lemmy.world · 11 pts · 11d (3 replies)

Reddit == Evil, but if you're looking for ideas there's an entire subreddit dedicated to this. Tons of ideas, links to 3d prints, and more:

https://www.reddit.com/r/minilab/

tofu@lemmy.nocturnal.garden · 7 pts · 11d (1 reply)

Yeah, they have a great wiki, it's how I found my stuff.

A (friend with a) 3D printer is essential. Stuff is fucking expensive on Etsy etc.

Tolookah@discuss.tchncs.de · 4 pts · 11d

I've ordered a few parts from jlcpbc printed recently, the prices were beyond reasonable. (Things that I wanted a resin print for to reduce layer problems)

It may help that they have a $10 off coupon, and I stayed really close to that.

northertech@fedia.io · 2 pts · 11d

One of the three subreddits I still visit.

sakphul@discuss.tchncs.de · 4 pts · 11d (3 replies)

Digitus has a lot to offer for 10" Racks. I use a lot of their Basic stuff for my Racks. AS a Server I am a fan of Mini-PC's. They are (imho) good enough for SOHO users. For storage an off the shelf NAS is small enough to fit inside the Rack. I did not find a good option yet for a TrueNAS solution (maybe one of the NAS solutions where you flash your own operating system?).

From my 10" homelab:

Enclosing: Digitus 10" 9HE Wandgehäuse. But today I would get the 12HE version of it (my Homelab expanded beyond the available space)
Patchfield: Digitus 10" 12 Port LSA Patchpanel Weiß. There are also keystone version if you prefer them. I did go for this because it is cheaper and I only need RJ45.
Power connector: DIGITUS 10 Zoll Steckdosenleiste. it has 4 sockjets and a switch. I am using 2 of them.
Shelfs for Servers, etc.: Digitus 10" Fachboden. I use them to keep my Mini-PC's and router in the Rack.
Router: Draytek Vigor2927 it just fits on a shelf and all Ports are accessible. It is connected to a Fibre-Modem, so it just being a router is good enough for me.
Switch: ALLNET Switch smart managed 16 Port Gigabit. Unfortunately I could not find an option including PoE (that is reasonably priced...) so I went for this managed Switch and an extra PoE Switch.
PoE Switch: YuanLey 11 Port Gigabit PoE Switch, 8 PoE+ Port 1000 Mbit/s, 2 Gigabit Uplink, 1 SFP Port, 120W 802.3af/at. It is not directly obvious from the product page. But the 2 included Rackmount ears work for a 10" Rack.
Mini-PC as Server: HP EliteDesk 800 G3 Desktop-Mini-PC . You can get these on the used market for cheap. Look if you can find one with an i5-8500T (KabyLake architecture). These chips have very good Transcoding qualities (Quicksync)
NAS: I use a Synology DS-918+. It fits on a shelf isnide the Rack. but due to Space limitations (9HE instead of 12HE) it is now stacked on top of my Rack.

I don't know where you are located. So maybe you need to check if these are available to you.

AA5B@lemmy.world · 1 pts · 10d (2 replies)

I’m having trouble translating how big your cabinet is ….. given the list of equipment similar to yours (nas, switch, router, ports), how many mini-pc’s fit?

sakphul@discuss.tchncs.de · 1 pts · 7d (1 reply)

My cabinet currently is 9HE high and it can fit 2 mini-pc's easily and all the rest. Just the NAS does not fit into it. For that I would need at least 12HE.

AA5B@lemmy.world · 1 pts · 7d

Thanks

Reannlegge@lemmy.ca · 3 pts · 11d (1 reply)

Are pi’s or other single board computers options for you? My home lab runs on a handful of pi’s a dying mac mini (I am looking at replacing the thing with a better computer) and a Flint 2, running OpenWRT. I have a Rock 5 or something like that but have never been able to figure it out.

derjules@lemmy.world · 4 pts · 11d

I’m currently running on a pi4 and a HP Elitedesk, those should be fine. Just need to tidy up everything else because I have to target a higher wife acceptance factor

tofu@lemmy.nocturnal.garden · 1 pts · 11d

In addition to the other comments, that's also !minilab@lemmy.world, it's pretty dead though

ExperiencedWinter@lemmy.world · 1 pts · 11d

It's a bit hard to justify a 3d printer for a single project, but if you think you'll use it for other projects then that's the way I would go. I just finished putting together a bit of a Frankenstein 10" rack based around these https://www.printables.com/model/1564648-rail-with-integrated-caps-for-10-inch-rack-system https://www.printables.com/model/1173672-10-mini-rack-all-3d-printable

Biggest callout would be to make sure the printers you're looking at have a large enough bed size to print the model you land on. The original one I was planning on printing couldn't fit on my printer.